When connecting using OPTICAL IN jack (optical digital audio input)

  • You may need to make optical digital output settings on the device connected to the OPTICAL IN jacks of the processor. Refer to the manual supplied with the device.
  • Connecting the OPTICAL IN jack on the processor to an optical digital output on your computer is not guaranteed to work.

Notes on handling the optical digital cable

  • Do not drop objects on the optical digital cable or expose the cable to shock.
  • Grasp the plug to connect or disconnect the cable carefully.
  • Be sure that the ends of the optical digital cable are kept clean. Dust at the ends of the cable can degrade performance.
  • When storing the cable, be careful not to fold or bend the optical digital cable with a bend radius less than 25 mm (1 in).

    A: The bend radius of the optical digital cable should be no less than 25 mm (1 in).

Go to Page Top