Basic icons displayed on the monitor

This section describes the screen display when the shooting mode is (Flexible Exp. Mode) for movie shooting and (Program Auto) for still image shooting.

  • The examples are of the display when the screen is in the all-information display mode.
  • The displayed content and positions are for reference only, and may differ from the actual display. Also, the displayed content may vary depending on the camera settings and the camera’s system software (firmware) version.

During movie recording

Illustration of the screen during movie recording

  1. [Exposure Mode] is set to (Flexible Exp. Mode).
  2. Audio level
  3. [File Format] is set to [XAVC S HD] and [Rec Frame Rate] is set to [59.94p].
  4. Time code
  5. The camera is in the shooting standby mode.
  6. Slot number of the memory card recording the shooting data and recordable movie time
  7. [Focus Mode] is set to [Continuous AF].
  8. Remaining battery level
  9. Shutter speed
  10. Aperture value
  11. Exposure compensation
  12. ISO sensitivity
  13. [White Balance] is set to [Auto].
  14. [ Shooting] is set to [On] or [Auto], and the recordable area is the APS-C-equivalent size.
  15. [D-Range Optimizer] is set to [Off].
  16. NFC is active.
  17. [Metering Mode] is set to [Multi].

During still image shooting

Illustration of the screen during still image shooting

  1. The shooting mode is set to (Program Auto).
  2. Number of still images that can be recorded on the memory card in the currently displayed slot
  3. Displayed when [AF Illuminator] is set to [Auto] and the camera detects that the AF Illuminator is required
  4. [JPEG/HEIF Switch] is set to [JPEG]. [JPEG Quality] is set to [Fine].
  5. [JPEG Image Size] is set to [12M].
  6. [SteadyShot] is set to [On].
  7. [Touch Func. in Shooting] is set to [Touch Tracking].
  8. [Drive Mode] is set to [Single Shooting].
  9. [Focus Area] is set to [Wide].
  10. [Face/Eye Prior. in AF] is set to [On] and [Face/Eye Subject] is set to [Human].
  11. [1st Zoom Spd.] under [Zoom Lever Speed] is set to [3].
  12. [Picture Profile] is set to [PP11].
Go to Page Top