Specifications
Optical System
Projection System
3 LCD system
Display Device
Effective Display Size
0.76 in (19.3 mm) × 3, 16:10 Aspect Ratio
Effective Pixels
6,912,000 pixels (1,920 × 1,200 pixels × 3)
Projection Lens
Focus Adjustment
Electric focus
Zoom Adjustment
Electric zoom: 1.6 times
Light Source
Laser diode
Projection Image Size
40 in - 600 in (1.02 m - 15.24 m)
Effective Light Flux (Brightness)
VPL-FHZ85: 7,300 lm ([Light Output Mode]: [Standard])
VPL-FHZ80: 6,000 lm ([Light Output Mode]: [Standard])
Electric System
Supported Scan Frequency*1
Horizontal: 15 kHz - 92 kHz, Vertical: 24 Hz - 92 Hz
Displayable Resolution*1
For Computer Signal Input
Maximum Display Resolution: 1,920 × 1,200 pixels
For Video Signal Input
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p, 3840×2160/60p, 3840×2160/50p, 3840×2160/30p, 3840×2160/25p, 3840×2160/24p, 4096×2160/60p, 4096×2160/50p, 4096×2160/30p, 4096×2160/25p, 4096×2160/24p
Color System
NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60
*1For details, refer to the supported signal table.
Input/Output Terminals
For Computer/Video Input and Output
Input A
RGB/Y PB PR Input Terminal: Mini D-sub 15 pin (Female), G with sync/Y: 1 Vp-p±2 dB, sync negative, 75 Ω terminated, RGB signal/PB PR signal: 0.7 Vp-p±2 dB, 75 Ω terminated, Sync signal: TTL level, high impedance, positive-negative polarity
Audio Input Terminal: Stereo mini jack, Rated input: 500 mVrms, Input impedance: 47 kΩ or above
Input B
DVI-D Input Terminal: DVI-D 24-pin (Single link), DVI 1.0 compliant, HDCP supported
Audio Input Terminal: Shared with Input A
Input C
HDMI Input Terminal: HDMI 19-pin, digital Y PB PR, HDCP
Audio Input Terminal: HDMI audio supported
Input D
HDBaseT Input Terminal: RJ45, digital RGB/Y PB PR, HDCP supported, RS-232C, Ethernet (100Base-TX) transmission supported
Video Input
Video Input Terminal: BNC, 1 Vp-p±2 dB, sync negative, 75 Ω terminated
Audio Input Terminal: Shared with Input A
Output A
Monitor Output Terminal: Mini D-sub 15-pin female, G with sync/Y: 1 Vp-p±2 dB, sync negative, 75 Ω terminated, RGB signal/PB PR signal: 0.7 Vp-p±2 dB, 75 Ω terminated, Sync signal: HD, VD 4 V (open), 1 Vp-p (75 Ω), positive/negative
Audio Output Terminal: Stereo mini jack, Stereo, 1 Vrms (maximum volume, when inputting 500 mVrms), Output impedance: 5 kΩ
Output B
DVI-D Output Terminal: DVI-D 24-pin (Single link), DVI 1.0 compliant, non-HDCP compliant
Other Terminals
RS-232C Terminal: D-Sub 9 pin (Male)
LAN terminal: RJ45, 10BASE-T/100BASE-TX
CONTROL S Input Terminal (DC power supply): Stereo mini jack, 5 Vp-p, Plug in power DC 5 V
USB Terminal: Type A
USB Power Supply Terminal: Type A
Power Supply/Other
Operating Temperature (Operating Humidity)
0 °C to 45 °C (32 °F to 113 °F) (20% - 80% (No condensation))
Storage Temperature (Storage Humidity)
−10 °C to +60 °C (14 °F to 140 °F) (20% - 80% (No condensation))
Power Requirements
100 V to 240 V AC, 5.1 A – 2.2 A, 50/60 Hz
Power Consumption
AC 100 V to 120 V
VPL-FHZ85: 506 W
VPL-FHZ80: 397 W
AC 220 V to 240 V
VPL-FHZ85: 474 W
VPL-FHZ80: 378 W
Standby Power Consumption (Standby Mode)
0.5 W (When setting [Standby Mode] to [Low] and [Remote Start ] to [Off])
Standby Power Consumption (Network Standby Mode)
1.0 W (When setting [Standby Mode] to [Low] and [Remote Start ] to [On])
16.0 W (If all network ports are connected) (When setting [Standby Mode] to [Standard])
Heat Dissipation
AC 100 V to 120 V
VPL-FHZ85: 1,727 BTU/h
VPL-FHZ80: 1,355 BTU/h
AC 220 V to 240 V
VPL-FHZ85: 1,617 BTU/h
VPL-FHZ80: 1,290 BTU/h
Standard Dimensions (W/H/D)
460 mm × 173.5 mm × 516.5 mm (18 1/8 in × 6 27/32 in × 20 11/32 in)
460 mm × 169 mm × 494 mm (18 1/8 in × 6 21/32 in × 19 7/16 in) (Without projecting parts)
Mass
VPL-FHZ85: Approx. 13 kg (29 lb)
VPL-FHZ80: Approx. 13 kg (28 lb)
Supplied Accessories
Remote Commander (RM-PJ30) (1)
Size AA (R6) batteries (2)
AC power cord (1)
Plug holder (1)
Setup Guide (1)
Optional Accessories*1 *2 *3
Projection Lens VPLL-3007
Manual focus
Projected image size: 60 in to 300 in (1.52 m to 7.62 m)
Maximum external dimensions (W × H × D): 150 mm × 150 mm × 222 mm (5 29/32 in × 5 29/32 in × 8 3/4 in)
Mass: Approx. 1.7 kg (3.7 lb 60 oz)
Projection Lens VPLL-Z3009
Manual focus/zoom
Projected image size: 60 in to 300 in (1.52 m to 7.62 m)
Maximum external dimensions (W × H × D): 150 mm × 150 mm × 217 mm (5 29/32 in × 5 29/32 in × 8 19/32 in)
Mass: Approx. 1.7 kg (3.7 lb 60 oz)
Projection Lens VPLL-Z3010
Electric focus/zoom (when attaching to this projector)
Projected image size: 60 in to 300 in (1.52 m to 7.62 m)
Maximum external dimensions (W × H × D): 150 mm × 150 mm × 227 mm (5 29/32 in × 5 29/32 in × 9 in)
Mass: 2.0 kg (4 lb 6.5 oz)
Projection Lens VPLL-Z3024
Electric focus/zoom (when attaching to this projector)
Projected image size: 40 in to 600 in (1.02 m to 15.24 m)
Maximum external dimensions (W × H × D): 97 mm × 105 mm × 177 mm (3 13/16 in × 4 9/64 in × 6 31/32 in)
Mass: 1.2 kg (2.6 lb 42 oz)
Projection Lens VPLL-Z3032
Electric focus/zoom (when attaching to this projector)
Projected image size: 40 in to 600 in (1.02 m to 15.24 m)
Maximum external dimensions (W × H × D): 97 mm × 105 mm × 177 mm (3 13/16 in × 4 9/64 in × 6 31/32 in)
Mass: 1.2 kg (2.6 lb 42 oz)
Projection Lens VPLL-3003
Electric focus/electric corner correction (when attaching to this projector)
Projected image size: 80 in to 300 in (2.03 m to 7.62 m)
Maximum external dimensions (W × H × D): 229 mm × 193.7 mm × 424.7 mm (9 1/32 in × 7 5/8 in × 16 23/32 in)
Mass: 2.9 kg (6.4 lb)
Projector Suspension Support PSS-650
Projector Suspension Support Joint Pole PSS-650P
*1Not all optional accessories are available in all countries and areas. Please check with your local Sony Authorized Dealer.
*2Information on accessories in this manual is current as of November 2021.
*3For details on the optional accessories, refer to their operating instructions.
Note
- The values for mass and dimensions are approximate values.
Designs and specifications of the unit, including the optional accessories, are subject to change without notice.
