Correcting Screen Distortion

You can correct image twist with the warp correction feature.

  1. Press the KEYSTONE key on the Remote Commander once.

    The [Screen Fitting] menu will be displayed.

    You can also display the menu from [Screen Fitting] in the [Installation] menu.

  2. Select [Warping].

    The guide will be displayed.

  3. Select the adjustment point you want to correct with the /// (Up/Down/Left/Right) keys.

    When correcting the corner position of the image, select the corner adjustment point.

    When correcting the deflection on the left/right sides of the image, select the left/right adjustment point.

    When correcting the deflection on the top/bottom sides of the image, select the top/bottom adjustment point.

  4. Press the ENTER key.

    The selected corner becomes a cursor display ().

  5. Adjust the image distortion with the /// (Up/Down/Left/Right) keys.

    When correcting the corner of the image

    Adjust the position of the corner using the /// (Up/Down/Left/Right) keys.


    When correcting deflection on the left/right sides of the image

    You can adjust the center point of deflection using the / (Up/Down) keys. For the range of deflection, use the / (Left/Right) keys. You can adjust the left/right side independently.


    When correcting deflection on the top/bottom sides of the image

    You can adjust the center point of deflection using the / (Left/Right) keys. For the range of deflection, use the / (Up/Down) keys. You can adjust the top/bottom independently.

Press the RESET key to return to the original screen.

Note

  • The setting may not be reset depending on the combination of the adjustment items of the [Screen Fitting] menu. In this case, reset all of the items from [Reset] in the [Screen Fitting] menu.
Go to Page Top