SteadyShot Settings (movie)

You can shoot with an appropriate SteadyShot setting for the attached lens.

  1. MENU → (Camera Settings2) → [SteadyShot] → [On].
  2. [SteadyShot Settings] → [SteadyShot Adjust.] → desired setting.

Menu item details

Auto:
Performs the SteadyShot function automatically according to the information obtained from the attached lens.
Manual:
Performs the SteadyShot function according to the focal-length set using [ Focal Length]. (8mm-1000mm)
  • Check the focal-length index and set the focal-length.

Note

  • The SteadyShot function may not work optimally when the power has just been turned on or right after you point the camera toward a subject.
  • When using a tripod, etc., make sure to turn off the SteadyShot function because this can cause any malfunction when shooting.
  • [SteadyShot Settings] will be unavailable when MENU → (Camera Settings2) → [SteadyShot] is set to [Off].
  • When the camera cannot obtain focal length information from the lens, the SteadyShot function does not work correctly. Set [SteadyShot Adjust.] to [Manual] and set [ Focal Length] to match the lens you are using. The currently set value for the SteadyShot focal length will appear next to (camera shake icon).
  • When using an SEL16F28 lens (sold separately) with a teleconverter, etc., set [SteadyShot Adjust.] to [Manual] and set the focal length.
  • If a lens equipped with a SteadyShot switch is attached, the settings can only be changed using that switch on the lens. You cannot switch the settings using the camera.
Go to Page Top