Specifications
Headset
Power source:
DC 5 V (Using a commercially available USB AC Adaptor)
Using built-in lithium-ion batteries (Product Operation Power: DC 3.85 V)
Operating temperature:
0 °C to 40 °C (32 °F to 104 °F)
Charging time:
Approx. 3.5 hours
Note
- Charging hours may be different depending on the conditions of use.
Charging temperature:
5 °C to 35 °C (41 °F to 95 °F)
Mass:
Approx. 260 g (9.18 oz) (without Microphone)
Approx. 3.2 g (0.12 oz) (USB Type-C Transceiver)
Approx. 13 g (0.46 oz) (Detachable Boom Microphone (with windscreen))
Impedance:
440 Ω (1 kHz) (when connecting via the headphone cable with the headset turned on)
21 Ω (1 kHz) (when connecting via the headphone cable with the headset turned off)
Sensitivity:
111 dB/mW (when connecting via the headphone cable with the headset turned on)
100 dB/mW (when connecting via the headphone cable with the headset turned off)
Frequency response:
5 Hz- 20 000 Hz (when connecting via the headphone cable with the unit turned off)
Communication specification
Communication system:
Bluetooth Specification version 5.3
Output:
Bluetooth Specification Power Class 1
Maximum communication range:
Line of sight approx. 10 m (32.8 ft) (1)
Frequency band:
Bluetooth: 2.4 GHz band (2.400 0 GHz - 2.483 5 GHz)
Wireless Transmitter Receiver Section: 2.4 GHz band (2.400 0 GHz - 2.483 5 GHz)
Compatible Bluetooth profiles (2):
A2DP/AVRCP/HFP/HSP
TMAP/CSIP/MCP/VCP/CCP
Supported Codec (3):
SBC
AAC
LC3
Transmission range (A2DP):
20 Hz - 20 000 Hz (Sampling frequency 44.1 kHz)
(1) The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, reception sensitivity, antenna’s performance, operating system, software application, etc.
(2) Bluetooth standard profiles indicate the purpose of Bluetooth communications between devices.
(3) Codec: Audio signal compression and conversion format
Design and specifications are subject to change without notice.
Eco and energy saving:
Power Consumption (Off Mode) : not available
Power Consumption (Standby Mode / Low Power Mode) : 0.5 W
Power Consumption (Networked Standby Mode) - Terminals : 0.5 W (Audio cable, Bluetooth® function, 2.4 GHz, maximum power consumption configuration)
Off Mode / Standby Mode / Low Power Mode Activated : This unit enters low power mode immediately after charging is completed when connected to the AC adaptor.
Networked Standby Mode Activated - Terminals : This unit enters networked standby mode immediately after playback is paused. *When this unit is connected to the AC adaptor, networked standby mode and low power mode are considered to be the same state, as the power consumption in networked standby mode is 0.5W or less.
Wireless Network(s) On/Off Switch : You can connect to the unit with a paired transceiver (YY2988) when the unit turns on.
You can turn off the wireless function by inserting the supplied headphone cable into the headphone cable input jack. Remove the headphone cable to turn on the wireless function.
Technical characteristics of the AC adaptor that can be used with the product : A commercially available USB AC adaptor capable of supplying an output current of 0.5 A (500 mA) or more.
Compatible iPhone models
iPhone 15 Pro Max
iPhone 15 Pro
iPhone 15 Plus
iPhone 15
iPhone 14 Pro Max
iPhone 14 Pro
iPhone 14 Plus
iPhone 14
iPhone SE (3rd generation)
iPhone 13 Pro Max
iPhone 13 Pro
iPhone 13
iPhone 13 mini
iPhone 12 Pro Max
iPhone 12 Pro
iPhone 12
iPhone 12 mini
iPhone SE (2nd generation)
iPhone 11 Pro Max
iPhone 11 Pro
iPhone 11
iPhone XS Max
iPhone XS
iPhone XR
iPhone X
iPhone 8 Plus
iPhone 8
(As of November 2024)
Depending on the iOS supported by the above models, the “Sound Connect” app may not be usable.