Connecting to a paired Bluetooth device
-
Turn on the headset, then turn on the Bluetooth mode.
Press and hold the power button (A) for about 2 seconds or more to turn on the headset.
You will hear a notification sound indicating that the headset is turned on.
The power indicator flashes in white twice.
When the Bluetooth indicator turns off, press and hold the Bluetooth button (B) for about 2 seconds to turn on the Bluetooth function.
You will hear a notification sound indicating that the Bluetooth mode is turned on.
The Bluetooth indicator flashes in blue twice, and then flashes slowly.
If the headset has automatically connected to the last connected device, you will hear a notification sound indicating that the connection is established.
Check the connection status on the Bluetooth device. If it is not connected, proceed to step 2.
-
Make the Bluetooth connection from the Bluetooth device.
For the operating procedures on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth device.
The Bluetooth indicator flashes quickly in blue for about 5 seconds, then changes to a slow flashing. You will hear a notification sound indicating that the connection is established from the headset.
Hint
- The above operating procedure is an example. For more details, refer to the operating instructions supplied with the Bluetooth device.
Note
- If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
- If you cannot connect your Bluetooth device to the headset, delete the headset pairing information on your Bluetooth device and perform pairing again. For the operating procedures on your Bluetooth device, refer to the operating instructions supplied with the Bluetooth device.