Pairing and connecting with a Bluetooth device

The operating procedure to register the device that you wish to connect to is called “pairing”. First, pair a device to use it with the headset for the first time.

Before starting the operating procedure, check the following.

  • The Bluetooth device is placed within 1 m (3.2 ft) of the headset.
  • The headset is charged sufficiently.
  • The operating instructions for the Bluetooth device is in hand.
  1. Turn on the headset.

    Press and hold the power button (A) for about 2 seconds or more.

    Illustration indicating the location of A

    You will hear a notification sound indicating that the headset is turned on.

    The power indicator flashes in white twice.

    When the Bluetooth indicator turns off, proceed to step 2.

    When the Bluetooth indicator lights up in blue, proceed to step 3.

  2. Turn on the Bluetooth mode.

    Press and hold the Bluetooth button (B) for about 2 seconds.

    Illustration indicating the location of B

    You will hear a notification sound indicating that the Bluetooth mode is turned on.

    The Bluetooth indicator flashes in blue twice, and then flashes slowly.

    The headset enters pairing mode automatically in the following cases: Proceed to step 4.

    • When you pair the headset with a device for the first time after purchasing the headset
    • After initializing the headset and clearing all pairing information

    When you want to pair an additional device, if the headset already has pairing information for other devices, proceed to step 3.

  3. Enter pairing mode on this headset.

    Press and hold the Bluetooth button for about 5 seconds.

    The Bluetooth indicator repeatedly flashes in blue twice in a row. You will hear the voice guidance say, “Pairing”.

  4. Perform the pairing procedure on the Bluetooth device to search for this headset.

    [INZONE H9 II] will be displayed on the list of detected devices on the screen of the Bluetooth device.

    If it is not displayed, repeat from step 3.

  5. Select [INZONE H9 II] displayed on the screen of the Bluetooth device for pairing.

    If Passkey (*) input is required, input “0000”.

    (*) A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.

  6. Make the Bluetooth connection from the Bluetooth device.

    Some devices automatically connect with the headset when pairing is complete.

    The Bluetooth indicator flashes quickly in blue for about 5 seconds, then changes to a slow flashing. You will hear a notification sound indicating that the connection is established from the headset.


    If they are not connected, see “Connecting to a paired Bluetooth device”.

Hint

Note

  • If pairing is not established within 5 minutes, pairing mode is canceled. In this case, start the operating procedure again from step 2.
  • Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
    • If pairing information is deleted, such as after a repair
    • When a 9th device is paired
      The headset can be paired with up to 8 devices. If you pair a 9th device, the pairing information with the oldest connection date and time will be overwritten with the information for the new device.
    • When the pairing information for the headset has been deleted from the connected Bluetooth device
    • When the headset is initialized
      All of the pairing information will be deleted. In this case, delete the pairing information for the headset from the connected device and then pair them again.