Connecting to a paired iPhone

  1. Unlock the screen of the iPhone if it is locked.
  2. Turn on the headset, then turn on the Bluetooth mode.

    Press and hold the power button (A) for about 2 seconds or more to turn on the headset.

    Illustration indicating the location of A

    You will hear a notification sound indicating that the headset is turned on.

    The power indicator flashes in white twice.

    When the Bluetooth indicator turns off, press and hold the Bluetooth button (B) for about 2 seconds to turn on the Bluetooth function.

    Illustration indicating the location of B

    You will hear a notification sound indicating that the Bluetooth mode is turned on.

    The Bluetooth indicator flashes in blue twice, and then flashes slowly.

    If the headset has automatically connected to the last connected device, you will hear a notification sound indicating that the connection is established.

    Check the connection status on the iPhone. If it is not connected, proceed to step 3.

  3. On your iPhone screen, go to [Settings] and touch [Bluetooth].

  4. Touch the switch to turn on the Bluetooth function.

  5. Touch [INZONE H9 II].

    The Bluetooth indicator flashes quickly in blue for about 5 seconds, then changes to a slow flashing. You will hear a notification sound indicating that the connection is established from the headset.

Hint

  • The above operating procedure is an example. For more details, refer to the operating instructions supplied with the iPhone.

Note

  • If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply turning on the headset. If this is the case, deactivate the Bluetooth function on the last-connected device or turn off the power.
  • If you cannot connect your iPhone to the headset, delete the headset pairing information on your iPhone and perform pairing again. For the operating procedures on your iPhone, refer to the operating instructions supplied with the iPhone.