Configuring an eSIM (XQ-FS54)

  • XQ-FS54: This model supports eSIMs (downloaded SIMs)
  • XQ-FS72: This model does not support the use of eSIMs.

You can check your model name by performing the following procedure.

[Settings] > [About phone]

The model name is displayed under the following title.

[Model]

To use an eSIM, perform setup from the Settings menu.

  1. Find and tap as follows.
    [Settings] > [Network & internet] > [SIMs]

    If you have a SIM card inserted or eSIM already downloaded, tap the following.

    [Add SIM]

  2. Follow the on-screen instructions to scan the QR Code provided by your network operator.
  3. Follow the on-screen instructions to download an eSIM.
  4. When the eSIM is finished downloading, enable the SIM.
    [Settings] > [Use this SIM]

Note

  • The procedure for setting an eSIM differs depending on the network operator. If the setting cannot be completed with the procedure described here, refer to the setting procedure provided by your network operator.

Hint

  • You can enable or disable the use of SIMs. Find and tap as follows.

    [Settings] > [Network & internet] > [SIMs]

    Then, tap the switch next to the name of desired SIM.

TP1000669480