Connecting the neckband speaker with a computer via a BLUETOOTH connection (Mac)

The process to register the information of a target device required for BLUETOOTH connection is called pairing.

To use a device in combination with the neckband speaker via a BLUETOOTH connection, it is necessary to pair the neckband speaker with devices on an individual basis.

Supported operation systems

macOS Catalina (version 10.15)

Before proceeding, make sure of the following:

  • Bring the neckband speaker within a distance of 1 m (3.2 ft) from your computer.

  • Charge the built-in battery sufficiently.

  • Bring the operating instructions supplied with your computer at hand for reference.

  • To avoid any sudden loud sound output from the neckband speaker, turn down the volume of both the computer and the neckband speaker or stop music playback.

  • Set the speaker of your computer to on.

    If the speaker of your computer is set to(mute), sound does not output on the neckband speaker.

    • When the speaker of your computer is set to on:

  1. Put the neckband speaker into pairing mode.

    At the time of purchase, the neckband speaker is paired with the supplied transmitter.

    To pair the neckband speaker with a second or subsequent BLUETOOTH device (of which pairing information the neckband speaker has), make sure that the neckband speaker is turned off, and then press and hold the(power)/(BLUETOOTH) button for about 5 seconds until you hear voice guidance (BLUETOOTH pairing). When the neckband speaker is in pairing mode, the indicator starts double flashing in blue.

    Note

    • Be sure to keep holding the button even in the event that you hear voice guidance (Power ON) in about 2 seconds after you press and hold(power)/(BLUETOOTH) button.

  2. Search for the neckband speaker on the computer.

    1. Click [(System Preferences)] - [Bluetooth] in the taskbar on the right-bottom of the screen.

    2. Select [SRS-NS7] from the Bluetooth screen, then click [Pair].

  3. Follow the on-screen instructions to establish a BLUETOOTH connection.

    When a BLUETOOTH connection is established, you hear voice guidance (BLUETOOTH connected) from the neckband speaker and the indicator on the neckband speaker starts flashing in blue.

    If a BLUETOOTH connection is not established, repeat the procedure all over again from stepnumber 1.

  4. Click the speaker icon in the top-right of the screen and select [SRS-NS7] from [Output Device].

    You can now enjoy music, etc. playing on the computer via the neckband speaker.

Hint

  • The above instructions are provided as an example. For details, refer to the operating instructions supplied with your computer. In addition, not all the computers are tested and found compatible with the above procedure and the procedure is not applicable to home-built computers.

  • When [SRS-NS7] and [LE_SRS-NS7] are displayed for the connection attempt, select [SRS-NS7].

    Although [LE_SRS-NS7] is first displayed, wait until [SRS-NS7] is displayed.

    It may take about 30 seconds to 1 minute before [SRS-NS7] is displayed.

    If [SRS-NS7] is not displayed, repeat the procedure all over again from step number 1.

  • If passkey entry is prompted on a Mac computer, enter “0000.”

    The passkey may be called a “passcode,” “PIN code,” “PIN number,” or “password.”

Note

  • The neckband speaker comes out of pairing mode in about 5 minutes and the indicator on the neckband speaker turns to slow blue flashing. If the neckband speaker comes out of pairing mode before you complete the procedure, repeat the procedure all over again from stepnumber 1.

  • Once the neckband speaker is paired with the BLUETOOTH device, there is no need to pair them again, except in the following cases:

    • Pairing information is deleted in the course of repair work, etc.

    • The neckband speaker is already paired with 8 devices and another device is to be paired.

      The neckband speaker can be paired with up to 8 BLUETOOTH devices. When a new device is paired in addition to 8 paired devices, the pairing information of the earliest device connected via a BLUETOOTH connection is replaced by the information of the new one.

    • The pairing information of the neckband speaker has been deleted from the paired BLUETOOTH device.

    • The neckband speaker is initialized.

      The pairing information of all BLUETOOTH devices except for the transmitter is deleted. Once the neckband speaker is initialized, it may fail to establish a BLUETOOTH connection with the computer. In such a case, delete the pairing information of the neckband speaker from the computer, and then pair the neckband speaker with the computer all over again.

  • The neckband speaker can be paired with multiple devices, but can only play music from one paired device at a time.

Go to Page Top