Setting the Date and Time

Set the date and time.

The time can be set from either [Use NTP server] or [Manual(Local)].

  1. Click the [Setting] tab and display the [Setting] page.

  2. Configure each item under the Date and Time and click [Apply].

Settings

[Current Date Time]

The currently set time will be displayed in the local time zone.

[Setting]

Enter the following items and set the date and time.

  • [Timezone]: Set the time zone. Daylight Savings Time is not supported.
  • [Use NTP server]: Select this if you are retrieving the time via a network (NTP server).
    • [NTP Server]: Enter the NTP server.
    • [Status]: Displays the status of the connection to the NTP server.
    • [latest server data]: Displays the information most recently obtained from the NTP server.
  • [Manual(Local)]: Select this if you will set the date and time manually.
    • [Date(yyyy-mm-dd)]: Enter the date.
    • [Time(hh:mm:ss)]: Enter the time.
Go to Page Top