Correcting a Vertical Trapezoid
If the screen is trapezoidal, perform a keystone correction.
- Press the KEYSTONE key on the Remote Commander once.
The adjustment menu will be displayed.
You can also display the adjustment menu from [V Keystone] in the
[Installation] menu. - Adjust the value with the
/
/
/
(Up/Down/Left/Right) keys.A: Increasing the value in the positive direction makes the upper side screen width smaller.
B: Increasing the value in the negative direction makes the lower side screen width smaller.
Press the RESET key to return to the non-corrected state.
Note
- Because keystone correction is an electronic form of correction, the image quality may be reduced.
- If vertical correction (V keystone correction) and horizontal adjustment (H keystone correction) are performed at the same time, the values in each adjustment menu may not reach the maximum.
