Using the E-mail Report Function

Configure the e-mail report function from the [E-mail Report] page.

Note

  • The entered value will not be applied until [Apply] is clicked.
  1. Click the [E-mail Report] tab and display the [E-mail Report] page.

  2. Select [Enable] in [E-mail Report].
  3. Configure [Send to] and [CC].
  4. Configure the [Report Timing] items.
  5. Click [Apply].
  6. Configure the [E-mail Account] items.
  7. Check [Send mail test] and click [Apply].

    A test e-mail will be sent to the set destination address.

Settings

[Send to], [CC]

Enter the destination e-mail address.

[Report Timing]

  • [Over Light usage time]: Send a report when the light usage time elapses the specified time. [Error]: Send a report when the projector detects an error.

[E-mail Account]

  • [User Name]: Enter the e-mail address.
  • [SMTP Server]: Enter the transmission e-mail server (SMTP) address.

Note

  • For networks performing Outbound Port25 Blocking, the e-mail report function cannot be used because the SMTP server cannot be connected to.
  • You cannot enter the following characters in the text box: ‘ “ \ & < >