Specifications
Optical System
Projection System
3 LCD system
Display Device
Effective Display Size
0.64 in (16.3 mm) × 3, 16:10 Aspect Ratio
Effective Pixels
6,912,000 pixels (1,920 × 1,200 pixels × 3)
Projection Lens
Focus Adjustment
Manual
Zoom Adjustment
Manual (1.6×)
Light Source
Laser diode
Projection Image Size
40 in - 300 in (1.02 m - 7.62 m)
Effective Light Flux (Brightness)
VPL-PHZ60: 6,000 lm ([Light Output Mode]: [Standard])
VPL-PHZ50: 5,000 lm ([Light Output Mode]: [Standard])
Electric System
Speaker
16 W × 1 (Monaural)
Supported Scan Frequency*1
Horizontal: 15 kHz - 92 kHz, Vertical: 24 Hz - 92 Hz
Displayable Resolution*1
For Computer Signal Input
Maximum Display Resolution: 1,920 × 1,200 pixels
For Video Signal Input
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p, 2160/30p*2, 2160/25p*2, 2160/24p*2
Color System
NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60
*1For details, refer to the supported signal table.
*2Displayed only when the number of horizontal pixels is 3,840.
Input/Output Terminals
For Computer/Video Input and Output
Input A
RGB/Y PB PR Input Terminal: Mini D-sub 15 pin (Female), G with sync/Y: 1 Vp-p±2 dB, sync negative, 75 Ω terminated, RGB signal/PB PR signal: 0.7 Vp-p±2 dB, 75 Ω terminated, Sync signal: TTL level, high impedance, positive-negative polarity
Audio Input Terminal: Stereo mini jack, Rated input: 500 mVrms, Input impedance: 47 kΩ or above
Input B/Input C
HDMI Input Terminal: 19-pin HDMI, HDCP
Audio Input Terminal: HDMI audio supported
Input D
HDBaseT Input Terminal: RJ45, digital RGB/Y PB PR, HDCP supported, RS-232C, Ethernet (100Base-TX) transmission supported
Video Input
Video Input Terminal: Phono jack, 1 Vp-p±2 dB, sync negative, 75 Ω terminated
Audio Input Terminal: Shared with Input A
Output
Audio Output Terminal: Stereo mini jack, Stereo, 1 Vrms (maximum volume, when inputting 500 mVrms), Output impedance: 5 kΩ
Other Terminals
RS-232C Terminal: D-Sub 9 pin (Male)
LAN Terminal: RJ45, 10BASE-T/100BASE-TX
USB Terminal: Type A
USB Power Supply Terminal: Type A
Power Supply/Other
Operating Temperature (Operating Humidity)
0 °C to 40 °C (32 °F to 104 °F) (20% - 80% (No condensation))
Storage Temperature (Storage Humidity)
−10 °C to +60 °C (14 °F to 140 °F) (20% - 80% (No condensation))
Power Requirements
100 V to 240 V AC, 4.4 A – 1.9 A, 50/60 Hz
Power Consumption
AC 100 V to 120 V: 440 W
AC 220 V to 240 V: 418 W
Standby Power Consumption (Standby Mode)
0.5 W (When setting [Standby Mode] to [Low] and [Remote Start] to [Off])
Standby Power Consumption (Network Standby Mode)
1.0 W (When setting [Standby Mode] to [Low] and [Remote Start] to [On])
16.0 W (If all network ports are connected) (When setting [Standby Mode] to [Standard])
Heat Dissipation
AC 100 V to 120 V: 1,502 BTU/h
AC 220 V to 240 V: 1,427 BTU/h
Standard Dimensions (W/H/D)
422 mm × 129 mm × 338 mm (16 5/8 in × 5 3/32 in × 13 5/16 in)
422 mm × 100 mm × 333 mm (16 5/8 in × 3 15/16 in × 13 1/8 in) (Without projecting parts)
Mass
VPL-PHZ60: Approx. 7.0 kg (15 lb)
VPL-PHZ50: Approx. 6.6 kg (14 lb)
Supplied Accessories
Remote Commander (RM-PJ8) (1)
Lithium battery (CR2025) (1)
AC power cord (1)
Mini D-sub 15-pin cable (1.8 m) (1) (1-970-584-11/Sony)
Setup Guide (1)
Design and specifications of the unit, including the optional accessories, are subject to change without notice.
