Configuring the Network Settings of the Projector

Configure the network functions from the [Setting] page.

Note

  • The entered value will not be applied until [Apply] is clicked.
  1. Click the [Setting] tab and display the [Setting] page.

  2. Configure [Location].
  3. Configure [Host Name].

    This host name must be the same as the Common Name (common name) of the certificate used when accessing via https communication. For details, refer to “Configuring https Communication.”

  4. Configure [Obtain an IP address automatically (DHCP)] or [Specify an IP address].
  5. Click [Apply].

Settings

[Obtain an IP address automatically (DHCP)]

Network settings are automatically assigned via the router or other device’s DHCP server function. The values allocated by the DHCP server are displayed in [IP Address], [Subnet Mask], [Default Gateway], and [DNS Server].

[Specify an IP address]

Configure the network manually.

  • [IP Address]: Enter the IP address of the projector.
  • [Subnet Mask]: Enter the subnet mask of the projector.
  • [Default Gateway]: Enter the default gateway of the projector.
  • [DNS Server]: Enter the primary DNS server of the projector.
Go to Page Top