Using the Fn (Function) button

If you press the Fn (function) button during shooting, a menu (function menu) containing frequently used functions such as the Drive Mode and Focus Mode is displayed on the screen, allowing you to quickly call up the functions.

Example of function menu

The displayed items differ depending on the camera status.

Illustration of the screen for the function menu

Hint

  • Use MENU → (Setup) → [Operation Customize] →[Fn Menu Settings] to register your favorite functions in the function menu. You can register 12 functions for shooting still images and 12 functions for shooting movies separately.
  • When [Touch Operation] is set to [On], touch operations on the menu screen are possible.
  • When [Touch Operation] is set to [On], you can also open [Fn Menu Settings] by holding down the icon in the function menu.
  1. Press the DISP on the control wheel repeatedly to display a screen mode other than [For viewfinder].
  2. Press the Fn (Function) button.

  3. Press the top/bottom/left/right side of the control wheel to select a function to set.

  4. Turn the front dial to select the desired setting, and press the center of the control wheel.
    • Some functions can be fine-tuned using the rear dial L or rear dial R.

Using the Fn button in the [For viewfinder] display

If you press the Fn button while the monitor display is set to [For viewfinder], you can directly operate items you want to change.


In the auto mode

Illustration of the screen in the Auto mode


In the P/A/S/M mode

Illustration of the screen in the P/A/S/M mode

  • The displayed contents and their positions shown in the illustrations are just a guideline, and may differ from the actual display.


To adjust settings from the dedicated setting screens

Select the icon for the desired function and then press the center of the control wheel. The dedicated setting screen for the function will appear. Follow the operating guide (A) to adjust settings.

Illustration indicating the location of the operating guide

Note

  • Items that are grayed out on the [For viewfinder] screen cannot be changed by pressing the Fn button.
  • Some settings, such as [Creative Look] and [Picture Profile], cannot be operated on the [For viewfinder] screen unless you enter the dedicated setting screen.
Go to Page Top