Charging the battery with a commercially available AC adaptor or mobile battery

You can use a USB cable to charge from an external power source, such as a commercially available USB AC adaptor or mobile battery.
When a device compatible with USB-PD (USB Power Delivery) is connected to the camera, fast charging is possible.

  1. Turn off the camera, and connect an external power source to the USB Type-C terminal on the camera.

    Charge lamp on the camera (orange)

    Lit: Charging

    Off: Charging finished

    Flashing: Charging error or charging paused temporarily because the camera is not within the proper temperature range

    • The charge lamp turns off when charging is completed.

Note

  • USB charging is not possible from the Multi/Micro USB terminal. Use the USB Type-C terminal to charge the battery pack.
  • If the product is connected to a laptop computer that is not connected to a power source, the laptop battery level decreases. Do not leave the product connected to a laptop computer for an extended period of time.
  • Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or waking the computer from sleep mode, disconnect the camera from the computer.
  • Charging cannot be guaranteed with a custom-built computer, modified computer, or a computer connected through a USB hub.
  • The camera may not operate correctly when other USB devices are used at the same time.
  • When you use an AC adaptor, use one with a rated output of 1.5 A or higher.
  • We recommend using a USB-PD device that is compatible with an output of 9V/3A or 9V/2A.
  • Before charging, be sure to also read “Notes on the battery pack and charging the battery.”
Go to Page Top