Connecting the camera to a computer

  1. Insert a sufficiently charged battery pack into the camera.
  2. Turn on the camera and the computer.
  3. (Setup)[USB] → Set [USB Connection Mode] to [MassStorage(MSC)].
  4. Connect the USB Type-C terminal on the camera to the computer with a USB cable (commercially available).
    • When you connect the camera to the computer for the first time, the procedure for recognizing the camera may start automatically on the computer. Wait until the procedure is finished.
    • If you connect the camera to your computer using the USB cable when [USB Power Supply] is set to [On], power is supplied from your computer. (Default setting: [On])
    • Use a cable that complies with the USB standard.
    • Use a SuperSpeed USB 5 Gbps (USB 3.2)-compatible computer and a commercially available USB cable for higher-speed communications.


  • Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or waking the computer from sleep mode, disconnect the camera from the computer.