Outputting RAW movies to an external RAW recorder

When shooting movies, RAW movies can be output to an external recorder connected to this camera via HDMI. Use a Premium High Speed HDMI cable (sold separately) to output RAW movies

The image size output for RAW movies is 4264 x 2408 pixels.

  1. Use a Premium High Speed HDMI cable (sold separately) to connect the HDMI Type A terminal on the camera to the HDMI input terminal on the external RAW recorder.
  2. Press the MODE (Mode) button on the camera, select [Movie] with the control wheel, and then press the center.
  3. On the camera, select MENU → (Setup) → [External Output] → [HDMI Output Settings] → [RAW Output] → [On].
  4. On the camera, select MENU → (Setup) → [External Output] → [HDMI Output Settings] → [RAW Output Setting] → the desired frame rate. ([59.94p] / [50p] / [29.97p] / [25p] / [23.98p] / [24.00p])
    Set the following items as necessary.
    • Rec. Media dur HDMI Output
    • Time Code Output
    • REC Control
    • 4ch Audio Output
    For detail, Refer to “ HDMI Output Settings (movie).”
  5. Press the REC (Recording) button on the camera to start recording.

Hint

  • For information on how to operate the external RAW recorder, refer to the recorder’s instruction manual.
  • When outputting RAW movies to another device connected via HDMI, set [Log Shooting] under [Log Shooting Setting] to a setting other than [Off]. The setting for [Color Gamut] under [Log Shooting Setting] is applied to RAW movies output via HDMI.

Note

  • If you perform recording operations using an external recorder instead of using the REC (Recording) button on the camera, recording may not be performed correctly.
Go to Page Top