Pairing and connecting with an Android smartphone

The operation to register the device that you wish to connect to is called “pairing”. First, pair a device to use it with the headset for the first time.

Before starting the operation, make sure of the following:

  • The Android smartphone is placed within 1 m (3.2 ft) of the headset.
  • The headset is charged sufficiently.
  • The operating instructions for the Android smartphone is in hand.
  1. Enter pairing mode on this headset.

    When you pair the headset with a device for the first time after purchase or after initializing the headset (when there is no pairing information on the headset)

    1. Lay the headset units on their sides and remove both headset units from the charging case.

      The headset turns on automatically.

      The headset enters pairing mode automatically.

      When you are wearing the headset, you will hear a notification sound from both headset units at the same time, and you will hear a voice guidance say “Pairing”. When you are wearing only one headset unit, you will hear the notification sound and voice guidance from the headset unit you are wearing.


    When you pair a second or subsequent device (the headset has pairing information for other devices)

    1. Set the headset units into the charging case.

      Leave the charging case lid open.

    2. With the charging case lid open, press and hold the pairing button on the back of the charging case for about 5 seconds or more.

      Note

      • The headset does not enter pairing mode with the charging case lid closed.

      The indicator (blue) on the charging case repeatedly flashes twice in a row and the headset goes into pairing mode.

      You can remove the headset from the charging case after entering pairing mode.

      When you are wearing the headset, you will hear a notification sound from both headset units at the same time, and you will hear a voice guidance say “Pairing”. When you are wearing only one headset unit, you will hear the notification sound and voice guidance from the headset unit you are wearing.

  2. Unlock the screen of the Android smartphone if it is locked.
  3. Find the headset on the Android smartphone.
    1. Select [Settings] - [Device connection] - [Bluetooth].

    2. Touch the switch to turn on the Bluetooth function.

  4. Touch [WF-1000XM5].

    If Passkey* input is required, input “0000”.

    The headset and smartphone are paired and connected with each other.

    When the headset is placed in the charging case, the indicator (blue) on the charging case flashes 10 times.

    When you are wearing the headset, you will hear a notification sound indicating that the connection is established from both headset units at the same time. When you are wearing only one headset unit, you will hear the notification sound from the headset unit you are wearing.

    If they are not connected, see “Connecting to a paired Android smartphone”.

    If [WF-1000XM5] does not appear on your Android smartphone screen, start the operation again from the beginning of step 3 .

    *A Passkey may be called “Passcode”, “PIN code”, “PIN number”, or “Password”.

About the instruction manual video

Watch the video to find out how to perform pairing for the first time.

https://rd1.sony.net/help/mdr/mov0056/h_zz/

Hint

Note

  • If pairing is not established within 5 minutes, pairing mode is canceled. In this case, start the operation again from the beginning of step 1 .
  • Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
    • Pairing information has been deleted after repair, etc.
    • When a 9th device is paired
      The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the registration information of the paired device with the oldest connection date is overwritten with the information for the new device.
    • When the pairing information for the headset has been deleted from the Bluetooth device
    • When the headset is initialized
      All of the pairing information is deleted. In this case, delete the pairing information for the headset from the connected device and then pair them again.
  • The headset can be paired with multiple devices, but can only play music from 1 paired device at a time.