Functions for a phone call

The functions available during a call may vary depending on the profile supported by your smartphone. In addition, even if the profile is the same, the available functions may vary depending on the smartphone.

Depending on the connected device or the application you are using, the functions may not work properly even if you try to operate them with the touch sensor control panel.

Refer to the operating instructions supplied with the smartphone.

Supported profile: HFP (Hands-free Profile)

During standby/music playback

  • Hold your finger to the touch sensor control panel to start up the voice dial function of the smartphone, or activate the Google app on the Android smartphone or Siri on the iPhone.

Outgoing call

  • Tap the touch sensor control panel twice quickly (with an interval of about 0.4 seconds) to cancel an outgoing call.

Incoming call

  • Tap the touch sensor control panel twice quickly to answer a call.
  • Hold your finger to the touch sensor control panel to reject a call.

When the head gesture setting is enabled on the “Sony | Sound Connect” app, you can perform the following operations while wearing the headset.

  • Receive a call: Nod your head.

  • Reject a call: Shake your head.

During call

  • If you enable the microphone on/off setting during a call on the “Sony | Sound Connect” app, you can switch the microphone on/off by quickly pressing the NC/AMB (Noise Canceling/Ambient Sound Mode) button twice.
  • Tap the touch sensor control panel twice quickly to finish a call.

Supported profile: HSP (Headset Profile)

Outgoing call

  • Tap the touch sensor control panel twice quickly to cancel an outgoing call.

Incoming call

  • Tap the touch sensor control panel twice quickly to answer a call.

During call

  • If you enable the microphone on/off setting during a call on the “Sony | Sound Connect” app, you can switch the microphone on/off by quickly pressing the NC/AMB (Noise Canceling/Ambient Sound Mode) button twice.
  • Tap the touch sensor control panel twice quickly to finish a call.

Hint

  • While the microphone is off, you will hear a notification sound every 7 seconds to indicate the off state. This notification sound can be turned on/off using the “Sony | Sound Connect” app.

Note

  • When [Head Gesture] is enabled on the “Sony | Sound Connect” app, the functions may not work properly with the head gesture controls depending on the connected device or the application you are using.
  • Depending on the video calling application you are using, it may not be possible to configure the microphone settings.
  • The microphone on/off operation only works with the headset microphone. It does not work with the microphone settings of your smartphone or computer software.