Attaching the remote control to the belt
Attach the remote control to the belt.
- Align the protruding portion of the remote control with the concave portion of the belt, while pulling the release lever on the rear of the belt toward the opposite side with your finger.
- Make sure that the remote control is set into the belt, then remove your finger from the release lever.
- To fasten the remote control to your arm, pass the one end of the belt through the hole on the other end of the belt, and fasten the belt with
. Then slide 
to hold the belt securely.
Note
- Attaching the belt incorrectly may cause injury.
- Be careful not to drop the remote control when unfastening the belt.
