Shooting still images

  1. Launch Photo Pro.
    • Find and tap (Photo Pro icon).
    • Press the device shutter button fully down.
    • Touch and hold (Camera button) from the lock screen.
    • Press the power button twice. Find and tap [Settings] > [System] > [Gestures] > [Quickly open camera], and then tap the switch to enable the function.
  2. Select a shooting mode.
    • AUTO (Auto mode): Settings values are determined appropriately by Photo Pro so that you can take photos of any subject under any conditions with good results.
    • P (Program auto): You can take photos with an automatically adjusted exposure (both the shutter speed and the aperture value).
    • S (Shutter speed priority): You can take photos of fast-moving subjects, etc. with a manually adjusted shutter speed. (The ISO value is adjusted automatically.)
    • M (Manual exposure): You can take photos with the desired shutter speed and ISO value.
    • MR (Memory recall): You can register up to 3 often-used combinations of modes or settings in advance and recall them when taking photos. Select [MR], select the number to recall, and then tap [Apply] to apply the settings displayed under [Recall camera settings].

    Image of selecting a shooting mode when using Photo Pro

  3. Adjust the settings.
  4. Adjust the focus.
    • Touch and hold the screen shutter button to focus.
    • Press the device shutter button halfway down to focus.

      Image showing how to hold your device horizontally while shooting an image using Photo Pro

  5. Shoot an image.
    • Release your finger from the screen shutter button.
    • Press the device shutter button fully down.

Note

  • There is no screen shutter button on the Photo Pro standby screen in the landscape orientation when the shooting mode is set to the AUTO/P/S/M mode. Use the device shutter button.

Hint

  • You can turn the haptic feedback on or off when interacting with the display, such as the mode dial. Tap [MENU] > [Setup] > [Haptic feedback].
TP0002936000