Sides

Illustration of the side view of the camera

Illustration of the side view of the camera

  1. HDMI type A jack
  2. Speaker
  3. (Microphone) jack

    When an external microphone is connected, the built-in microphone turns off automatically. When the external microphone is a plugin-power type, the power of the microphone is supplied by the camera.

  4. (Headphones) jack
  5. Charge lamp
  6. Multi/Micro USB Terminal*

    This terminal supports Micro USB-compatible devices.

  7. USB Type-C terminal
  8. Hooks for shoulder strap

    Attach both ends of the strap onto the camera.

  9. (N-Mark)
    • This mark indicates the touch point for connecting the camera and an NFC-enabled Smartphone.

    • NFC (Near Field Communication) is an international standard of short-range wireless communication technology.
  10. SLOT 1 (Memory card slot 1)
  11. SLOT 2 (Memory card slot 2)

* For details on compatible accessories for the Multi/Micro USB Terminal, visit the Sony website, or consult your Sony dealer or local authorized Sony service facility.

Notes on USB terminals

You can use either the USB Type-C terminal or the Multi/Micro USB Terminal for USB communications. However, you cannot conduct USB communications with both terminals simultaneously. Use the USB Type-C terminal to supply power and charge the battery pack.

  • You can use accessories for the Multi/Micro USB Terminal, such as a remote commander (sold separately), while supplying power or performing PC Remote shooting using the USB Type-C terminal.


Notes on the terminal cover

Ensure that the terminal cover is closed before use.


Notes on the cable protector

Use the cable protector to prevent a cable from being disconnected when shooting images with the cable connected.


To attach the cable protector

  1. Open the HDMI terminal cover, headphone terminal cover, and USB terminal cover.
  2. Fit the hook (A) of the cable protector into the notch (B) below the Multi/Micro USB terminal, and press down so that it does not come off, and then attach it so that it covers the terminal surface of the unit.
  3. Push the attachment screw (C) in and turn it to secure the cable protector.

    Illustration showing how to attach the cable protector

  4. Insert the cable into one of the jacks.
  5. Insert the cable into the holding part and then secure the cable with the fixing dial (D).

    Illustration showing how to secure the cable


To remove the cable protector

Loosen the attachment screw, and then remove the cable protector.