Outputting a test tone from each speaker (Test Tone)

You can output a test tone from each speaker in sequence.

  1. Select [Setup] - [Speaker Settings] from the home menu.
  2. Select [Manual Speaker Settings].
  3. Select [Test Tone].
    The same operation can also be performed by pressing TEST on the remote control.
  4. Select the setting you want.
    • Off
    • Auto: The test tone is output from each speaker in sequence.
    • Front (L), Center, TV Center, Front (R), Surround (L), Surround (R), Surround Back (L), Surround Back (R), Height (L), Height (R), Subwoofer: You can select which speakers will output the test tone.
  5. Adjust the speaker level.

Note

  • When [Bluetooth Mode] is set to [Transmitter], this function does not work.

Hint

  • To adjust the level of all speakers at the same time, press (volume) +/–. You can also use MASTER VOLUME on the unit.
  • The adjusted value is shown on the TV screen during adjustment.
Go to Page Top