Switching the TVs that output the HDMI video signals

If [HDMI OUT B Mode] is set to [Main], and you have connected two TVs to the HDMI OUT A (TV) and HDMI OUT B/ZONE 2 jacks, you can switch the output for these two TVs using the HDMI OUT button on the remote control.

  1. Connect two TVs to the unit, and turn on the unit and the two TVs.
  2. Press HDMI OUT.

    Each time you press the button, the output will be switched as follows:

    HDMI A - HDMI B - HDMI A+B - HDMI OFF

Note

  • [HDMI A+B] may not work if the compatible video formats of the TVs connected to the HDMI OUT A (TV) jack and the HDMI OUT B/ZONE 2 jack of the unit are different.
  • [HDMI A+B] may not work depending on the playback device you connect.
  • When you connect two Dolby Vision-compatible TVs to the unit and select [HDMI A+B], Dolby Vision content is output in the HDR10 or SDR (Standard Dynamic Range) format. To enjoy Dolby Vision content as it is, connect only one Dolby Vision-compatible TV to the unit, or select either [HDMI A] or [HDMI B].
  • If [HDMI OUT B Mode] is set to [Zone2], you cannot select [HDMI B] and [HDMI A+B].
  • When [HDMI OUT B Mode] is set to [Zone2], the HDMI signals are output to the Zone 2 even if [HDMI OFF] is selected.
Go to Page Top