Enjoying audio content using the BLUETOOTH function (Pairing operation)

Pairing is an operation where BLUETOOTH devices are registered to each other before connection. Once a pairing operation is performed, it does not need to be performed again. Be sure to set the [Bluetooth Mode] to [Receiver] before pairing a device with this unit.

  1. Place the BLUETOOTH device within 1 meter (3.3 feet) of the unit.
  2. Press and hold BLUETOOTH on the unit to select the BLUETOOTH function.

    [PAIRING] flashes on the display panel.

  3. Perform pairing on the BLUETOOTH device to detect this unit.

    For details, refer to the operating instructions of your BLUETOOTH device.

    A list of detected devices may appear on the BLUETOOTH device display depending on the type of BLUETOOTH device. This unit is displayed as [STR-AZ1000ES].

  4. Select [STR-AZ1000ES] on the BLUETOOTH device display.
    If [STR-AZ1000ES] is not displayed, repeat this process from step 1.

    When the BLUETOOTH connection is established, the paired device name appears and [BT] lights up on the display panel.

  5. Start playback on the BLUETOOTH device.
  6. Adjust the volume.

    Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level of the unit.

Canceling pairing operation

Pairing operation will be canceled when you switch the input.

Note

  • Some applications of BLUETOOTH device cannot be controlled from the unit.
  • If a passkey is required on the display of the BLUETOOTH device in step 4, enter [0000]. The passkey may be called “Passcode,” “PIN code,” “PIN number” or “Password.”
  • You can pair up to 10 BLUETOOTH devices. If a 11th BLUETOOTH device is paired, the least recently connected device will be replaced by the new one.
  • BLUETOOTH on the unit does not work when the [Bluetooth Mode] is set to [Off].

Hint

  • You can change the name of the unit that appears on your device in [Device Name Setting] in the [System Settings] menu.
Go to Page Top