Connecting a LAN cable (for wired LAN connections only)

We recommend that you connect the server to the router with a wired connection. Connect the unit to the network using a LAN cable (*) (not supplied).

Illustration of connecting the unit to the same network as the server. Connect the LAN port on the rear of the unit with the LAN port on the router connected to the server using a LAN cable (not supplied).

Server (computer, etc.)

LAN cable (*) (not supplied)

Router

Modem

Internet

* We recommend using category 7 cables.

Hint

  • Use a router compatible with transmission speeds of 100 Mbps or greater.
  • We recommend that you use a router equipped with a built-in DHCP (Dynamic Host Configuration Protocol) server because the default setting on the unit is DHCP.
    This function automatically assigns IP addresses to devices on the LAN.
  • We recommend using a normal shielded type cable for a wired LAN to avoid electric noise.
    Some flat-type LAN cables are easily affected by noise. We recommend using a Category 7 cable.
Go to Page Top