Making the initial settings

When you turn on your linear PCM recorder for the first time, the Configure Initial Settings screen appears on the display window. Make the initial settings, such as selecting the display language, setting the date and time, and turning on/off the beep sound.

  1. Press.

    The Language screen is displayed.

    If the Language screen is not displayed, proceed to step 3.

  2. Pressorto select the display language, and then press.

    You can select from the following languages:

    English, (Simplified Chinese), (Traditional Chinese).

    The Set Date/Time screen is displayed.

  3. Set the current date and time.

    Pressorto set an item, and then press.

    Repeat the actions to set all items.

    To move the focus backward or forward, pressor. You can also press BACK/HOME to move the focus to the previous item.

    When you are finished with the last item, pressto apply the settings to the clock.

  4. Pressorto select [Next], and then press.

    The Beep screen is displayed.

  5. Pressorto select [ON] or [OFF] to turn on or off the beep sound, and then press.

    When the initial settings finish, the completion message and then the HOME menu appear.

Note

  • The date appears in year/month/date, month/date/year or date/month/year format, depending on the selected date display format (Date Display Format) on the Settings menu. In addition, the default date display format depends on the country or region of your purchase.

  • The clock may tell the time either in 12-Hour format with [AM] or [PM] or in the 24-Hour format, depending on the selected clock display format (Time Display) on the Settings menu. In addition, the default clock display format depends on the country or region of your purchase.

  • Depending on the country or region of your purchase, you may not be able to select the language. Even when it is available, the number of available languages and the default language depend on the country or region.

Hint

  • If you remove the batteries and insert them back in place after an interval of 2 minutes or more, or if you replace the batteries with new ones, the Date&Time screen is displayed. This screen shows the date and time that you had last used the linear PCM recorder before you removed the batteries. Change the date and time to the current ones.

  • You can change the language setting, the date and time setting, and the beep setting at any time later by selecting [ Settings] - [Common Settings] from the HOME menu.

  • When you are finished with the initial settings, placing your linear PCM recorder into the HOLD state displays the current date and time on the display window.

Go to Page Top

The contents of the Help Guide may be subject to change without notice due to updates to the product's specifications.