Recording fails.

  • The MIC/LINE INPUT LEVEL switch or the XLR/TRS INPUT LEVEL switch is in the wrong position. When using the built-in microphones or an external microphone for recording, slide the switch to [MIC]. When using the connected external device for recording, slide the switch to [LINE].
  • If a recording starts but no playback sounds are heard, the recording volume may be too low. Turn the REC LEVEL dial to adjust the volume.
  • You cannot record in folders managed under [ Music].
  • The memory is full, or the maximum number of files (199 files) has already been recorded. You cannot record any more files. Select another folder or delete some of the files. Or store the files on the hard disk of your computer, and then delete them from the linear PCM recorder. You can also use an SD card with sufficient capacity for storing recorded files.
  • When using the SD card, the write-protect switch on the card is placed in the [LOCK] position. Release the write-protect setting.
  • Check the [Plug In Power] setting of the menu if using the external microphone connected to the MIC IN/LINE IN jack.
  • If you are using a phantom power compatible microphone that is connected to one of the XLR/TRS jacks, first connect the microphone, and then slide the phantom power switch to [ON].
Go to Page Top

The contents of the Help Guide may be subject to change without notice due to updates to the product's specifications.