Connecting to a paired iPhone

  1. Unlock the screen of the iPhone if it is locked.
  2. Turn on the headset.

    Press and hold the (power) button for about 2 seconds.

    You will hear the voice guidance say, “Power on”. Check that the indicator (blue) continues to flash after you release your finger from the button.

    If the headset has automatically connected to the last connected device, you will hear the voice guidance say, “Bluetooth connected”.

    Check the connection status on the iPhone. If it is not connected, proceed to step 3.

  3. Display the devices paired with the iPhone.
    1. Select [Settings].
    2. Touch [Bluetooth].

    3. Touch the switch to turn on the Bluetooth function.

  4. Touch [WH-1000XM4].

    You will hear the voice guidance say, “Bluetooth connected”.

Hint

  • The operation above is an example. For more details, refer to the operating instructions supplied with your iPhone.

Note

  • When connecting, if [WH-1000XM4] and [LE_WH-1000XM4] are displayed, select [WH-1000XM4].
    [LE_WH-1000XM4] will be displayed first, but wait until [WH-1000XM4] is displayed.
    It may take about 30 seconds to 1 minute for [WH-1000XM4] to be displayed.
    If [WH-1000XM4] is not displayed, perform the pairing again.
  • If the last-connected Bluetooth device is placed near the headset, the headset may connect automatically to the device by simply turning on the headset. In that case, deactivate the Bluetooth function on the last-connected device or turn off the power.
  • If you cannot connect your iPhone to the headset, delete the headset pairing information on your iPhone and perform the pairing again. As for the operations on your iPhone, refer to the operating instructions supplied with the iPhone.
Go to Page Top