CLOUD SERVICEC3 Portal

You can make calls between the broadcast station and units in the field using camcorders with an intercom function.

The streaming receiver (PWS-110RX1A) channel used for communication must be specified for each camcorder beforehand.

1. Set the [Intercom] switch to the ON position on the [Streaming] tab of the [Live] screen.
   The status of the intercom function is displayed on the [Intercom] switch.
   • (Blank): The receiver audio channel is not an active port.
   • Offline: Intercom module is offline on the transmitter side or receiver side
   • Not available: Intercom is not available on the transmitter side or receiver side
   • In use: Audio channel on the receiver side is being used by another transmitter
   • Not connected: Ready to connect
   • Connecting…: Starting or stopping intercom communications
   • Connected: Intercom is running
   • Unstable: Connection is unstable

   Note

   • Before you start the intercom, you first need to enable the intercom module and insert a supported audio device into both the transmitter and receiver sides. For details, refer to the manual for the transmitter and receiver.
2. Make an intercom call.
   You can initiate a call between the configured intercom system and an online camcorder.

   Note

   • An intercom call can be made even when streaming.
   • For information about other limitations that may occur when using the intercom function, refer to the manual for the transmitter.