Cont. Shooting
Shoots images continuously while you press and hold down the shutter button.
- / (Drive Mode) button → [Cont. Shooting].
- You can also set the continuous shooting by selecting MENU→ (Camera Settings1) → [Drive Mode].
- Select the desired mode by pressing the multi-selector right/left.
Menu item details
- Continuous Shooting: Hi+ :
- Images are shot continuously at the maximum speed while you press and hold down the shutter button. The aperture value is locked when the first shot is taken.
- Continuous Shooting: Hi /Continuous Shooting: Mid/Continuous Shooting: Lo:
- Subjects are easier to track because the subject is displayed in real-time on the monitor or viewfinder during shooting.
Number of still images recordable with continuous shooting*
(When [Continuous Shooting: Hi] is selected.)
JPEG L-size Extra fine: 65 images
JPEG L-size Fine: 71 images
JPEG L-size Standard: 74 images
RAW (Compressed RAW): 57 images
RAW & JPEG (Compressed RAW): 56 images
RAW (Uncompressed RAW): 26 images
RAW & JPEG (Uncompressed RAW): 25 images
*The number of still images may vary depending on the shooting conditions and the memory card.
Auto focus in continuous shooting
For the first shot of continuous shooting, all of the focus points are available if the Hybrid Phase Detection AF is active, and the dedicated phase detection AF points are available if the Hybrid Phase Detection AF is not active. Focus points available from the second shot onward are described in the table below.
Even if the lens supports the Hybrid Phase Detection AF, the auto focus area is limited to the dedicated phase detection AF area for the first shot in the following situations:
- [AF System] is set to [Ddc Phase AF Only].
- [Selectable AF Area] is set to [Only Cross-Type AF].
Hybrid Phase Detection AF compatibility of the lens | Auto focus capability from the second shot onward | |||
---|---|---|---|---|
Minimum F value – F3.5 | F4 – F8 | F9 or more | ||
Continuous Shooting: Hi+ |
Compatible | All points | All points (only the focal plane phase detection AF sensor is active) | Focus is locked when the first shot is taken |
Incompatible | Dedicated phase detection AF sensor area (61 points) | Focus is locked when the first shot is taken | Focus is locked when the first shot is taken | |
Continuous Shooting: Hi / Continuous Shooting: Mid |
Compatible | All points | All points | Dedicated phase detection AF sensor area |
Incompatible | Dedicated phase detection AF sensor area | Dedicated phase detection AF sensor area | Dedicated phase detection AF sensor area | |
Continuous Shooting: Lo |
Compatible | All points | All points | All points |
Incompatible | Dedicated phase detection AF sensor area | Dedicated phase detection AF sensor area | Dedicated phase detection AF sensor area |
Conceptual diagram
All points
Dedicated phase detection AF sensor area
Dedicated phase detection AF sensor area (61 points)
Hint
- To continuously adjust the focus and exposure during continuous shooting, set as follows:
- [Focus Mode]: [Continuous AF]
- [AEL w/ shutter]: [Off] or [Auto]
Note
- The shooting speed during continuous shooting becomes slower when [RAW File Type] is set to [Uncompressed] in [Continuous Shooting: Hi+] mode.
- The shooting speed during continuous shooting becomes slower when [e-Front Curtain Shut.] is set to [Off] in [Continuous Shooting: Hi], [Continuous Shooting: Mid] or [Continuous Shooting: Lo] mode.
- The subject is not displayed in real-time on the monitor or viewfinder when shooting in [Continuous Shooting: Hi+] mode.
- Continuous shooting is unavailable in the following situations:
- The shooting mode is set to [Sweep Panorama].
- [Picture Effect] is set to one of the following: [Rich-tone Mono.]
- [DRO/Auto HDR] is set to [Auto HDR].