Exposure Comp.

Normally, exposure is set automatically (auto exposure). Based on the exposure value set by auto exposure, you can make the entire image brighter or darker if you adjust [Exposure Comp.] to the plus side or minus side, respectively (exposure compensation).

  1. Turn the exposure compensation dial (A).

    + (over) side:
    Images become brighter.

    - (under) side:
    Images become darker.

    • You can adjust the exposure compensation value within the range of -3.0 EV to +3.0 EV.
    • You can confirm the exposure compensation value that you set on the shooting screen.

      Monitor

      Viewfinder

To set the exposure compensation using the MENU

You can adjust the exposure compensation within a range of -5.0 EV to +5.0 EV when the exposure compensation dial is set to “0.”

MENU→ (Camera Settings1) → [Exposure Comp.] → desired setting.

Note

  • You cannot perform the exposure compensation in the following shooting modes:
    • [Intelligent Auto]
  • When using [Manual Exposure], you can perform the exposure compensation only when [ISO] is set to [ISO AUTO].
  • The settings of the exposure compensation dial will be prioritized over [Exposure Comp.] or [Dial Ev Comp] in MENU.
  • Only a value between -3.0 EV and +3.0 EV with the equivalent image brightness appears on the screen when shooting. If you set an exposure compensation value outside this range, the image brightness on the screen will not be affected, but the value will be reflected in the recorded image.
  • You can adjust the exposure compensation value within the range of -2.0 EV to +2.0 EV for movies.
  • If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able to get a satisfactory effect.
  • When you set the exposure compensation dial to “0” from a setting other than “0,” the exposure value switches to “0” regardless of the [Exposure Comp.] setting.
Go to Page Top