Operating the camera from a computer (PC Remote Function)

Uses a Wi-Fi or USB connection, etc. to control the camera from a computer, including such functions as shooting and storing images on the computer.

Select MENU → (Network) → [Ctrl w/ Smartphone][Ctrl w/ Smartphone][Off] beforehand.

For details on [PC Remote Function], refer to the following URL:

https://support.d-imaging.sony.co.jp/support/tutorial/ilc/l/ilce-9m2/pcremote.php

  1. MENU (Network) → [PC Remote Function] → Select an item to set, and then select the desired setting.
  2. Connect the camera to the computer, and then launch Imaging Edge (Remote) on the computer.
    You can now operate the camera using Imaging Edge (Remote).
    • The connection method between the camera and the computer depends on the setting for [PC Remote Cnct Method].

Menu item details

PC Remote:
Sets whether or not to use the [PC Remote] function. ([On] / [Off])
PC Remote Cnct Method:
Selects the connection method when the camera is connected to a computer using [PC Remote]. ([USB]/[Wired LAN]/[Wi-Fi Direct]/[Wi-Fi Access Point])
Pairing:
When [PC Remote Cnct Method] is set to [Wired LAN] or [Wi-Fi Access Point], pair the camera with the computer.
Wi-Fi Direct Info.:
Displays the information needed to connect to the camera from the computer when [PC Remote Cnct Method] is set to [Wi-Fi Direct].
Still Img. Save Dest.:
Sets whether or not to save still images to both the camera and the computer during PC Remote shooting. ([PC Only]/[PC+Camera]/[Camera Only])
RAW+J PC Save Img:
Selects the file type for images to be transferred to the computer when [Still Img. Save Dest.] is set to [PC+Camera]. ([RAW & JPEG]/[JPEG Only]/[RAW Only])
PC Save Image Size:
Selects the file size for images to be transferred to the computer when [Still Img. Save Dest.] is set to [PC+Camera]. The original-sized JPEG file or a 2M-equivalent JPEG file can be transferred. ([Original]/[2M])
Connect without Pairing:
Selects whether to connect the camera to a computer without pairing when [PC Remote Cnct Method] is set to [Wired LAN] or [Wi-Fi Access Point]. (when the camera’s system software (firmware) is Ver.2.00 or later) ([Enable]/[Disable])


How to connect the camera and the computer

When [PC Remote Cnct Method] is set to [USB]

Connect the camera and the computer using a USB Type-C cable (supplied).


When [PC Remote Cnct Method] is set to [Wired LAN]

Connect the camera to the computer or a switching hub using a commercially available LAN cable. The camera and the computer need to be paired in advance if [Connect without Pairing] is set to [Disable].

Connect the camera and the computer or switching hub using the LAN cable, and select MENU→ (Network) → [PC Remote Function][Pairing] on the camera, then use Remote Camera Tool to pair the camera and the computer. Select [OK] on the pairing confirmation screen displayed on the camera to finish pairing.

  • Pairing information is deleted when you initialize the camera.

When [PC Remote Cnct Method] is set to [Wi-Fi Direct]

Use the camera as an access point, and connect the computer to the camera directly via Wi-Fi.

Select MENU(Network) → [PC Remote Function][Wi-Fi Direct Info.] to display the Wi-Fi connection information (SSID and password) for the camera. Connect the computer and the camera using the Wi-Fi connection information displayed on the camera.


When [PC Remote Cnct Method] is set to [Wi-Fi Access Point]

Connect the camera and the computer via Wi-Fi using a wireless access point. The camera and the computer need to be paired in advance if [Connect without Pairing] is set to [Disable].

Select MENU(Network) → [Wi-Fi Settings][WPS Push] or [Access Point Set.] to connect the camera to the wireless access point. Connect the computer to the same wireless access point.
Select MENU → (Network) → [PC Remote Function][Pairing] on the camera, and then use Imaging Edge (Remote) to pair the camera and the computer. Select [OK] on the pairing confirmation screen displayed on the camera to finish pairing.

  • Pairing information is deleted when you initialize the camera.

Note

  • When an unrecordable memory card is inserted into the camera, you cannot record still images even if [Still Img. Save Dest.] is set to [Camera Only] or [PC+Camera].
  • When [Camera Only] or [PC+Camera] is selected and no memory card is inserted into the camera, the shutter will not be released even if [Release w/o Card] is set to [Enable].
  • While a still image is being played back on the camera, you cannot shoot with [PC Remote].
  • [RAW+J PC Save Img] can only be selected when [File Format] is set to [RAW & JPEG].
  • If you set [Connect without Pairing] to [Enable], unintended third parties may access the camera. Sony is not liable for any problems or damage caused by setting [Connect without Pairing] to [Enable]. (when the camera’s system software (firmware) is Ver.2.00 or later)