Specifications

System

Camera Type
Interchangeable Lens Digital Camera
Lens
Sony E-mount lens

Image sensor

Image format
35 mm full frame (35.7 mm × 23.8 mm), CMOS image sensor
Effective pixel number of camera
Approx. 61 000 000 pixels
Total pixel number of camera
Approx. 62 500 000 pixels

Auto focus system

Detection system
Phase-detection system/Contrast detection system
Sensitivity Range
–4 EV to +20 EV (at ISO 100 equivalent, F2.0)

Exposure control

Metering method
1 200-zone evaluative metering
Metering Range
–3 EV to +20 EV (at ISO 100 equivalent with F2.0 lens)
ISO sensitivity (Recommended exposure index)
Still images: ISO 100 to ISO 32 000 (Extended ISO: Minimum ISO 50, maximum ISO 102 400), [ISO AUTO] (ISO 100 to ISO 12 800, Maximum/Minimum can be set.)
Movies: ISO 100 to ISO 32 000 equivalent, [ISO AUTO] (ISO 100 to ISO 12 800 equivalent, Maximum/Minimum can be set.)
Exposure compensation
±5.0 EV (switchable between 1/3 EV and 1/2 EV steps)

Shutter

Type
Electronically-controlled, vertical-traverse, focal-plane type
Speed range

Still images (mechanical shutter): 1/4000 second to 30 seconds, BULB

Still images (electronic shutter): 1/8000 second to 30 seconds

Movies: 1/8000 second to 1 second (1/3 EV step)
60p-compatible devices: up to 1/60 second in AUTO mode (up to 1/30 second in Auto slow shutter mode)
50p-compatible devices: up to 1/50 second in AUTO mode (up to 1/25 second in Auto slow shutter mode)


Continuous shooting

Continuous shooting speed
(Continuous Shooting: Hi+) : Maximum of approx. 8.0 images per second/ (Continuous Shooting: Hi): Maximum of approx. 6.0 images per second/ (Continuous Shooting: Mid): 3.0 images per second/ (Continuous Shooting: Lo): Maximum of approx. 2.5 images per second
  • Based on our measurement conditions. The speed of continuous shooting can be slower, depending on the shooting conditions.

Recording format

File format
JPEG (compliant with DCF Ver. 2.0, Exif Ver. 2.32, and MPF Baseline), HEIF (MPEG-A MIAF compliant), RAW (Sony ARW 4.0 format compliant)
Movie (XAVC HS format)
XAVC Ver2.1: MP4 format compliant
Video: MPEG-H HEVC/H.265
Audio: LPCM 2ch (48 kHz 16 bit)*
Movie (XAVC S format)
XAVC Ver2.1: MP4 format compliant
Video: MPEG-4 AVC/H.264
Audio: LPCM 2ch (48 kHz 16 bit)*

* This camera does not have an audio input, so sound will not be recorded.


Recording media

SD cards (UHS-I and UHS-II compatible)


Input/output terminals

USB Type-C terminal
SuperSpeed USB 5Gbps (USB 3.2)
HDMI
HDMI type D micro jack
Power & Control terminal
Molex Micro-Fit 3.0 6 pin (430450622)

Power, general

Rated input
10 V – 18 V Direct current
Power & Control Cable (DC IN jack)

Power consumption
Using an FE 28-70mm F3.5-5.6 OSS
Approx. 3.8 W (while shooting still images)
Approx. 6.5 W (while shooting movies)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
–20 °C to 55 °C (–4 °F to 131 °F)
Dimensions (W/H/D) (Approx.)
100 × 74 × 42.5 mm
4 × 3 × 1 11/16 in.
Mass (Approx.)
243 g (8.6 oz) (camera body only)
Exif Print
Compatible
PRINT Image Matching III
Compatible

Wireless LAN

WW559681 (see name plate on the bottom of camera)
Supported format
IEEE 802.11 a/b/g/n/ac
Frequency band
2.4 GHz / 5 GHz
Security
WEP/WPA-PSK/WPA2-PSK/WPA3-SAE
Connection method
Wi-Fi Protected Setup™ (WPS)/Manual
Access method
Infrastructure mode


WW853104 (see name plate on the bottom of camera)
Supported format
IEEE 802.11 b/g/n
Frequency band
2.4 GHz
Security
WEP/WPA-PSK/WPA2-PSK/WPA3-SAE
Connection method
Wi-Fi Protected Setup™ (WPS)/Manual
Access method
Infrastructure mode


Bluetooth communications

Bluetooth standard Ver.4.2

Frequency band
2.4 GHz


Dimensions

Dimensions are approximate values.

Unit: mm

Illustration indicating the external dimensions

Note

  • Fixing (M3) screw hole
    • Hole depth: 4.5 mm (3/16 inches) or more
    • Do not use screws longer than 4.5 mm (3/16 inches). Doing so may cause a malfunction.
    • Recommended tightening torque: 0.6 N・m
  • Tripod screw hole (1/4-20 UNC)
    • Hole depth: 5.5 mm (7/32 inches) or more
    • Do not use screws longer than 5.5 mm (7/32 inches). Doing so may cause a malfunction.
    • Recommended tightening torque: 2.0 N・m
  • Positioning hole
    • Hole depth: 3.0 mm (1/8 inches) or more

Design and specifications are subject to change without notice.

TP1001221835