Lamp indications

The lamps on this unit light up, flash, or turn off according to the device status or communication status as described below.

: Lit in green /: Lit in orange /: Lit in blue /: Lit in yellow /: Lit in red /: Unlit

Power lamp (Microphone)

  • When the microphone is on and the battery level is sufficient

    (Lit in green)

  • When the microphone battery level is low

    ------------(Flashes slowly in orange)

  • When the microphone is being charged

    (Lit in orange)

    The lamp turns off when charging is complete.

  • When a charging error occurs (such as abnormal battery temperature)

    ----(Flashes quickly in orange)

LINK lamp (Microphone)

Connecting the microphone to the receiver

  • When the microphone is in Bluetooth connection standby

    ------------(Flashes slowly in blue)

  • When the microphone enters pairing mode

    ----(Flashes quickly in blue)

  • When a Bluetooth connection is established and audio can be recorded clearly

    (Lit in blue)

  • When the communication status is poor and audio is interrupted

    (Flashes in blue (The faster it flashes, the poorer the communication status.))*

Connecting the microphone to a smartphone/computer

  • When the microphone is in Bluetooth connection standby

    ------------(Flashes slowly in yellow)

  • When the microphone enters pairing mode

    ----(Flashes quickly in yellow)

  • When a Bluetooth connection is established and audio can be recorded clearly

    (Lit in yellow)

  • When the communication status is poor and audio is interrupted

    (Flashes in yellow (The faster it flashes, the poorer the communication status.))*

* Due to surrounding factors, including poor radio conditions and a large number of obstacles between the microphone and the receiver/smartphone/computer, the communication status between the two devices may deteriorate, causing audio interruptions or noise. When this occurs, the LINK lamp on the microphone continues to flash. Make sure that the two devices are positioned at an appropriate distance from each other, that there are no obstacles between them, and that the LINK lamp is lit steadily before using the microphone.

REC lamp (Microphone)

  • When recording with the microphone

    (Lit in red)

  • When the microphone is muted

    ------------(Flashes slowly in red)

Charging status indicator lamp (Charging case)

You can check the charging status, remaining battery level, and battery status of the charging case.

  • When the charging case is being charged

    • The charging case battery level is 60% or higher.

      (The left and center lamps are lit, and the right lamp flashes.)

    • The charging case battery level is 6% to 59%.

      (The left lamp is lit, the center lamp flashes, and the right lamp is unlit.)

    • The charging case battery level is 0% to 5%.

      (The left lamp flashes, and the center and right lamps are unlit.)

    • Battery charging is completed.

      All three lamps turn off.

  • When opening the lid of the charging case while the charging case is not being charged

    • The charging case battery level is 80% or higher.

      (All three lamps are lit.)

    • The charging case battery level is 61% to 79%.

      (The left and center lamps are lit, and the right lamp is unlit.)

    • The charging case battery level is 6% to 60%.

      (The left lamp is lit, and the center and right lamps are unlit.)

    • The charging case battery level is 5% or lower.

      (All three lamps flash.)

  • When a charging error occurs (such as an abnormal battery temperature)

    All three lamps flash quickly.

TP1002542208