MONITOR SET.

This section describes [MONITOR SET.] in the headphone menu.

[MONITOR SET.] is displayed when [MODE SELECT] in the system menu is set to [2TX].

You can select which audio to monitor through the headphones.

  • CH1 / CH2

    Monitors audio from the microphones assigned to CH1 and CH2.

  • CAM HP

    Monitors audio from the camera's headphone output.

Note

  • When [CH1 / CH2] is selected and the receiver's audio input jack is connected to the camera's headphone output jack, noise may be heard in the audio monitored through the headphones. To monitor audio from the camera, be sure to select [CAM HP].

  • When [CAM HP] is selected and the receiver's audio input jack is connected to the camera's headphone output jack, the camera stops supplying power to the receiver. This is not a malfunction.

  • When [MONITOR SET.] in the headphone menu is set to [CAM HP] and the receiver's audio input jack is connected to the camera's headphone output jack, the receiver does not turn on or off in sync with the camera even if [CAM-RX] under [POWER LINK] is set to [ON]. Turn the receiver on or off manually.

TP1002542228