Pairing and connecting with BLUETOOTH® devices

When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.

Before operating the speaker, be sure to do the following:

  • Place the BLUETOOTH device within 1 m (3.2 ft) of the speaker.

  • Connect the speaker to an AC outlet via the supplied USB AC adaptor. Or, charge the built-in rechargeable battery sufficiently.

  • Stop playback on a BLUETOOTH device.

  • Turn down the volume of the BLUETOOTH device and speaker to avoid any sudden loud sound output from the speaker. Depending on the BLUETOOTH device, the volume of the device may be synchronized with the speaker.

  1. Press(on/standby) button.

    The speaker turns on. The BLUETOOTH indicator slowly flashes in white.

    When you turn on the speaker, the speaker tries to make a BLUETOOTH connection with the last connected BLUETOOTH device. If there is a BLUETOOTH device to which the speaker was previously connected nearby, simply turning on the speaker may cause the speaker to connect to that device automatically and cause the BLUETOOTH indicator to light up white. In this case, turn off the BLUETOOTH function or turn off the power of the currently connected BLUETOOTH device.

  2. Press and hold the BLUETOOTH/ PAIRING button for about 2 seconds.

    The speaker’s BLUETOOTH indicator quickly flashes in white, and then the speaker makes a sound*to indicate that it has entered pairing mode.

  3. Perform the pairing procedure on the BLUETOOTH device to detect the speaker.

    When a list of detected devices appears on the display of the BLUETOOTH device, select “LSPX-S2.” If a passkey* is required on the display of the BLUETOOTH device, enter “0000.”

    * The passkey may also be called a “passcode,” “PIN code,” “PIN number” or “password.”

  4. Listen for the sound* that indicates pairing was successful.

    The BLUETOOTH indicator also lights up white.

    If the BLUETOOTH connection is not established, repeat from step.

Hint

  • Once the BLUETOOTH function is activated on the BLUETOOTH device which has been connected to the speaker via a BLUETOOTH connection, the BLUETOOTH device is connected to the speaker again by just pressing the (on/standby) button.

  • For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device.

Note

  • After about 5 minutes, the speaker’s pairing mode is canceled and the BLUETOOTH indicator turns off. If the speaker’s pairing mode is canceled before the procedure is complete, do the operations from stepagain.

  • The passkey of this speaker is “0000.” If a passkey besides “0000” is set on the BLUETOOTH device, pairing cannot be done with the speaker.

  • Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:

    • Pairing information has been deleted after repair, etc.

    • The speaker is already paired with 8 devices and another device is to be paired.

      The speaker can be paired with up to 8 devices. If a new device is paired after 8 devices have already been paired, the device that was paired earliest is replaced by the new one.

    • The pairing information of the speaker has been deleted from the BLUETOOTH device.

    • The speaker is initialized.

      All pairing information will be deleted. If you initialize the speaker, it may not be able to connect your iPhone/iPod touch or computer. In this case, erase the pairing information of the speaker on your iPhone/iPod touch or computer, and then perform the pairing procedure again.

  • The speaker can be paired with multiple devices, but can only play music from one paired device at a time.

  • To output music from a BLUETOOTH device with the connection cord still in the AUDIO IN jack, either press the BLUETOOTH/ PAIRING button on the bottom of the speaker or use “Sony | Music Center” to switch to the music that you want to use for play back.

Go to Page Top