Using 2 speakers to enjoy wireless playback via BLUETOOTH connection (Speaker Add function)

By using the Speaker Add function, you can connect a single BLUETOOTH device to 2 LSPX-S2 speakers for playback. When using the Speaker Add function, one speaker acts as the “master unit,” while the other acts as the “satellite unit.” Select from the following 2 playback methods.

  1. Master unit

  2. Satellite unit

Double mode

Both speakers play the same sound. The speaker is set to double mode by default.

Stereo mode

One speaker plays the sound on the right channel (right side), while the other speaker plays the sound on the left channel (left side) for stereo playback between the 2 speakers.

  1. Turn on 2 speakers and bring them within 1 m (3.2 ft) of each other. Then press and hold the ADD (Speaker Add function) button for at least 2 seconds on each.

    The speaker on which you first pressed the ADD (Speaker Add function) button is the master.

    A sound* will indicate that the Speaker Add function has been activated, and the BLUETOOTH indicator will flash quickly in orange.

  2. Operate the speaker (master) with the flashing BLUETOOTH indicator to connect to the BLUETOOTH device.

    When the BLUETOOTH indicator lights up, the BLUETOOTH device is connected to the speaker.

  3. Start playing music on the BLUETOOTH device and adjust the volume.

    Press the / (volume) buttons on one of the speakers to adjust the volume.

Hint

  • Connect your BLUETOOTH device to the master unit.

  • When using the Speaker Add function, some operations can only be performed by the master unit, while others can be performed by both the master unit and the satellite unit.

  • Once setup is complete, the speakers can be separated by more than 1 m (3.2 ft).

  • If you turn off the power while the Speaker Add function is in use, when you turn the power back on, the speaker will attempt playback using the Speaker Add function. To use the Speaker Add function, turn on the other speaker.

  • If you want to use the speaker that was last used with the Speaker Add function by itself, turn on the speaker, then press the ADD (Speaker Add function) button for at least 2 seconds to cancel the Speaker Add function.

  • If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the BLUETOOTH device that is connecting with the speaker, there may be distorted sound or noise in the speaker output. In this case, terminate the BLUETOOTH connection between the BLUETOOTH device and other BLUETOOTH device(s).

  • When using the Speaker Add function, the codec automatically switches to SBC.

Note

  • If you want to reset one of the speakers while using the Speaker Add function, be sure to cancel the Speaker Add function. If you do not cancel the Speaker Add function before resetting a speaker, malfunctions will occur, such as weak BLUETOOTH connections and interrupted sounds.

  • You cannot listen to music from an external device connected to the AUDIO IN jack while using the Speaker Add function.

  • If you are using the Speaker Add function to watch videos, there may be a lag between the video and audio.

Go to Page Top