Setting ADCP
You can change the control protocol settings of ADCP on the [ADCP] page in [Advanced Settings].
Note
- The entered value will not be applied until the [Apply] button is clicked.
-
Select [Advanced Settings] - [ADCP] and display the [ADCP] page.
-
Set each item and click the [Apply] button.
Setting items
[Start ADCP Service]
Turn ADCP on or off. The settings related to ADCP are applied only if it is on.
[Requires Authentication]
Turn the ADCP authentication function on or off. The web page administrator password is set for the password.
[Port No.]
Enter the ADCP server port. The factory default setting is “53595.”
[Timeout]
Enter the time (seconds) until the connection is cut when ADCP communication is interrupted. The factory default setting is “60.”
[Host address list]
Enter the IP address that is allowed to be received by the ADCP server. If nothing is entered, commands can be received from any IP address. Once an IP address has been entered, access will only be allowed from the entered IP address. For security purposes, we recommend entering an IP address to restrict access.
