Video ProjectorVPL-XW8100/VPL-XW6100

VPL-XW8100/VPL-XW6100

Projection System

3 LCD system

Display device

Size of effective display area: SXRD 0.61-inch (15.4 mm) × 3

Number of pixels: 3840 × 2160 × 3 pixels

Projection lens

2.1 times zoom lens (motorized), F2.5 to F3.24

Projection image size

60-inch to 300-inch (1 524 mm to 7 620 mm)

Light source

Laser diode

Inputs/Outputs

HDMI terminal (HDCP 2.3): 2 system

REMOTE terminal: RS-232C, D-Sub 9-pin (Male)

LAN terminal: RJ45, 10BASE-T/100BASE-TX

USB terminal: Type A, DC 5 V, Max. 500 mA

IR IN terminal: 1 system, mini jack

TRIGGER terminal: 1 system, mini jack, DC 12 V, Max. 100 mA

This unit is HDCP-compliant.

Outside dimensions (w/h/d)

460 mm × 210 mm × 517 mm (18 1/8 inches × 8 9/32 inches × 20 11/32 inches)

Mass

Approx. 14 kg (31 lb)

Power requirements

VPL-XW8100
AC 100 V to 240 V, 4.4 A to 2.0 A, 50/60 Hz
VPL-XW6100
AC 100 V to 240 V, 4.0 A to 1.8 A, 50/60 Hz

Power consumption

VPL-XW8100
AC 100 V to 240 V: 420 W
VPL-XW6100
AC 100 V to 240 V: 380 W

Standby power consumption (Standby mode)

0.3 W (When [Remote Start] is set to [Off])

Standby power consumption (Networked standby mode)

0.5 W (LAN) (When [Remote Start] is set to [On])

When the LAN terminal is not connected, the unit goes into low power consumption mode (0.4 W).

Standby mode / Networked standby mode activated

After about 10 minutes

Operating temperature (Operating humidity)

5°C to 35°C (41°F to 95°F) (20% to 80% (No condensation))

Storage temperature (Storage humidity)

–10°C to +60°C (14°F to 140°F) (20% to 80% (No condensation))

Supplied accessories

Remote control (RM-PJ24) (1)

Size AA batteries (2)

Lens cap (1)

AC power cord (1)

Setup Guide (1)

Design, specifications, and optional accessories are subject to change without notice.