Available input sources for each zone
Available input sources vary depending on the zone you have selected.
Available input sources for main zone
You can select all input sources from every device connected to the receiver in the main zone.
| Input name | Input source |
|---|---|
| BD/DVD |
|
| SAT/CATV |
|
| GAME |
|
| STB |
|
| VIDEO |
|
| AUX |
|
| TV |
|
| SA-CD/CD |
|
| FM TUNER |
|
| AM TUNER |
|
Input sources which can be output to Zone 2 (analog connection)
The following input sources can be output to Zone 2.
| Input name | Input source |
|---|---|
| SOURCE |
|
| BD/DVD |
|
| SAT/CATV |
|
| GAME |
|
| STB |
|
| VIDEO |
|
| AUX |
|
| TV |
|
| SA-CD/CD |
|
| FM TUNER |
|
| AM TUNER |
|
*1 The following restrictions are set on the digital audio signals input from the HDMI, coaxial and optical input jacks on the receiver:
- Only 2ch PCM signals are output to Zone 2.
- Digital audio stream signals such as DSD and Dolby Digital are not output to Zone 2.
- Multi-channel stream signals are automatically converted to 2 channels signals, and then output to Zone 2 if the same source signals as the main zone are selected in Zone 2.
If the digital audio signals input from the HDMI, coaxial and optical input jacks on the receiver are not output to Zone 2, set the audio output to 2ch PCM on the connected device. For details, refer to the operating instructions of the connected device.
Note
- When [FM TUNER] or [AM TUNER] is selected at the same time in the main zone and Zone 2 or Zone 3, the item most recently selected will be set.
- If you change the sound field or speaker settings in the main zone while the input for Zone 2 is set to [SOURCE] or the same input is selected in the main zone and Zone 2, the sound may also be momentarily interrupted in Zone 2.
Input sources which can be output to Zone 2 (HDMI connection)
The following input sources can be output to Zone 2 when Zone 2 speakers are connected to another receiver or amplifier connected to the HDMI OUT B (ZONE 2) jack.
| Input name | Input source |
|---|---|
| SOURCE |
|
| BD/DVD |
|
| SAT/CATV |
|
| GAME |
|
| STB |
|
| VIDEO |
|
| AUX |
|
| TV |
|
| SA-CD/CD |
|
| FM TUNER |
|
| AM TUNER |
|
*2The following restrictions are set on the digital audio signals input from the coaxial and optical input jacks on the receiver:
- Only 2ch PCM signals are output to Zone 2.
- Digital audio stream signals such as DSD and Dolby Digital are not output to Zone 2.
- Multi-channel stream signals are automatically converted to 2 channels signals, and then output to Zone 2 if the same source signals as the main zone are selected in Zone 2.
If the digital audio signals input from the coaxial and optical input jacks on the receiver are not output to Zone 2, set the audio output to 2ch PCM on the connected device. For details, refer to the operating instructions of the connected device.
*3 The receiver cannot output a different analog signal to the HDMI OUT B (ZONE 2) jack while an analog signal of the main zone is being output from the HDMI OUT A jack.
Note
- When [FM TUNER] or [AM TUNER] is selected at the same time in the main zone and Zone 2 or Zone 3, the item most recently selected will be set.
- If you change the sound field or speaker settings in the main zone while the input for Zone 2 is set to [SOURCE] or the same input is selected in the main zone and Zone 2, the sound may also be momentarily interrupted in Zone 2.
Input sources which can be output to Zone 3
The following input sources can be output to Zone 3.
You cannot watch video in Zone 3.
| Input name | Input source |
|---|---|
| SOURCE |
|
| VIDEO |
|
| AUX |
|
| TV |
|
| SA-CD/CD |
|
| FM TUNER |
|
| AM TUNER |
|
Note
- When [FM TUNER] or [AM TUNER] is selected at the same time in the main zone and Zone 3, the item most recently selected will be set.
