Manual Exposure

You can shoot with the desired exposure setting by adjusting both the shutter speed and aperture.

  1. MODE (Mode) button → [Manual Exposure] → press the center of the control wheel.
    • You can also set the shooting mode by selecting MENU → (Camera Settings1) → [Shoot Mode].
  2. Press the down side of the control wheel to select the shutter speed or aperture value, then turn the control wheel to select a value.
    • You can also set [ISO] to [ISO AUTO] in manual exposure mode. The ISO value automatically changes to achieve the appropriate exposure using the aperture value and shutter speed you have set.
    • When [ISO] is set to [ISO AUTO], the ISO value indicator will blink if the value you have set is not suitable for appropriate exposure. If this happens, change the shutter speed or aperture value.
    • When [ISO] is set to other than [ISO AUTO], use MM (Metered Manual)* to check the exposure value.
      Toward +: Images become brighter.
      Toward -: Images become darker.
      0: Appropriate exposure analyzed by the product.

      *Indicates under/over for appropriate exposure.

  3. Adjust the focus and shoot the subject.

Hint

  • By assigning [AEL hold] or [AEL toggle] to a desired key using [Custom Key] or [Custom Key] and turning the control wheel while pressing that key, you can change the shutter speed and aperture (F-value) combination without changing the set exposure value. (Manual shift)

Note

  • The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO].
  • When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes.
  • The SteadyShot warning indicator does not appear in manual exposure mode.
  • The brightness of the image on the screen may differ from the actual image being shot.
  • You cannot set [ND Filter] to [Auto].
Go to Page Top