Controlling the audio device (Bluetooth connection)
If your Bluetooth device supports the device operating function (compatible profile: AVRCP), the following operations are available. The available functions may vary depending on the Bluetooth device, so refer to the operating instructions supplied with the device.
You can use the right unit of the headset to perform the following operations.
- Play/Pause: Tap the headset or the area near your ear twice quickly (with an interval of about 0.2 seconds between taps).
- Skip to the beginning of the next track: Tap the headset or the area near your ear 3 times quickly (with an interval of about 0.2 seconds between taps).
If the function of the right unit of the headset is changed to [Volume Control] with the “Sony | Headphones Connect” app, you can use the right unit of the headset to perform the following operations.
- Increase the volume: Tap the headset or the area near your ear twice quickly (with an interval of about 0.2 seconds between taps) during music playback. The volume increases by 1 step.
- Decrease the volume: Tap the headset or the area near your ear 3 times quickly (with an interval of about 0.2 seconds between taps) during music playback. The volume decreases by 1 step.
When the volume reaches the maximum or minimum, an alarm sounds.
If the function of the right unit of the headset is changed to [Select Song] with the “Sony | Headphones Connect” app, you can use the right unit of the headset to perform the following operations.
- Skip to the beginning of the next track: Tap the headset or the area near your ear twice quickly (with an interval of about 0.2 seconds between taps).
- Skip to the beginning of the previous track (or the current track during playback): Tap the headset or the area near your ear 3 times quickly (with an interval of about 0.2 seconds between taps).
Note
- In the factory settings, you cannot adjust the volume with the headset. When using the headset without the functions of the headset changed to [Volume Control] on the “Sony | Headphones Connect” app, adjust the volume on the connected device. The volume can also be adjusted on the “Sony | Headphones Connect” app.
- When the headset is connected to the USB transceiver and you are playing music on the computer, the volume cannot be adjusted on the “Sony | Headphones Connect” app.
- If the communication condition is poor, the Bluetooth device may react incorrectly to the operation on the headset.
- The available operations may vary depending on the connected device, the music software, or app used. In some cases, it may operate differently or may not work even when the operations described above are performed.
- When the headset is connected to the USB transceiver and you are playing music on the computer, the play, pause, skip to the beginning of the next track, or skip to the beginning of the previous track (or the current track during playback) operations are disabled. These functions also cannot be operated on the “Sony | Headphones Connect” app. Operate them on the computer.
