Save/Load Settings

You can save/load camera settings to/from a memory card or to/from the cloud (C3 Portal). You can also load settings from another camera of the same model.

Saving/loading a setting file to/from the cloud can be performed when the camera’s system software (firmware) is Ver.3.00 or later.

A service contract is required to use C3 Portal.

If you want to use the cloud to save/load a setting file, connect the camera to the smartphone application Creators’ App for enterprise in advance.

For details on Creators’ App for enterprise, refer to the following website.

  1. MENU(Setup) → [Reset/Save Settings][Save/Load Settings] → desired item.
    • When you perform [Load] or [Save], select [Media]/[Cloud(Private)]/[Cloud(Share)] as the loading source or save destination of the setting file.

Menu item details

Loads settings from a memory card or from the cloud to this camera.
Saves the current settings of this camera to a memory card or to the cloud.
Deletes the settings saved on a memory card.

Settings that cannot be saved

The following setting parameters cannot be saved using the [Save/Load Settings] function. (Menu items without setting parameters, such as, [Focus Magnifier], are not listed.)

IPTC Information
Copyright Info

White Balance: Custom 1/Custom 2/Custom 3

Face Memory

FTP Transfer Func. *1
Cloud Connection *2
WPS Push
Access Point Set.
Wi-Fi Frequency Band
IP Address Setting
Edit Device Name
Import Root Certificate
Access Authen. Settings *3

*1 You can save or load settings under [FTP Transfer Func.] by selecting MENU (Network) → [FTP Transfer][FTP Transfer Func.][Save/Load FTP Settings]. For details, refer to the “FTP Help Guide.”

*2When the camera's system software (firmware) is Ver.4.00 or later.

*3When the camera's system software (firmware) is Ver.2.00 or later.

Area/Date/Time Setting


  • You can save up to 10 settings per memory card. When 10 settings have been already saved, you cannot perform [Save New]. Delete the existing settings using [Delete], or overwrite them.
  • You can save up to 60 settings in C3 Portal. When 60 settings have been already saved, you cannot perform [Save New]. Overwrite the existing settings or use C3 Portal to delete them.
  • Only Slot 1 is used for saving or loading data. You cannot change the saving/loading destination slot.
  • You cannot load settings from a camera of a different model.
  • Even if the model name is the same, settings from a camera with a different system software version may fail to load.
  • You can use this function to save settings registered to [Camera Set. Memory]. However, [Save/Load Settings] is unavailable when the shooting mode is set to [Recall Camera Setting]. Set the shooting mode to a mode other than MR ( Recall Camera Setting) before using this function.