4ch Audio Monitoring (movie)
Sets the audio to be monitored by the device connected to the 
(headphone) terminal of the camera when you record movie audio in 4 channels or when playing back a movie recorded in 4 channels.
- MENU →
(Setup) → [Sound Option] → [
4ch Audio Monitoring] → desired setting.
Menu item details
- CH1/CH2:
- Outputs audio from channel 1 to the L (left) side and from channel 2 to the R (right) side.
- CH3/CH4:
- Outputs audio from channel 3 to the L (left) side and from channel 4 to the R (right) side.
- CH1+3/CH2+4:
- Outputs the mixed audio of channel 1 and channel 3 to the L (left) side and the mixed audio of channel 2 and channel 4 to the R (right) side.
- CH1/CH1:
- Outputs audio from channel 1 to the L (left) side and R (right) side.
- CH2/CH2:
- Outputs audio from channel 2 to the L (left) side and R (right) side.
Note
-
The [4ch Audio Monitoring] settings are enabled during movie recording when the XLR handle unit (supplied only with the ILME-FX30) or an accessory for 4-channel audio recording is attached to the Multi Interface Shoe of the camera and the camera is set to record 4-channel audio.
- The camera cannot output audio in 4 channels to the device connected to the (headphone) terminal of the camera.
- When outputting audio through the speakers of the camera, the channels will also change depending on the [4ch Audio Monitoring] setting.
