HDMI settings (FDR-X3000/HDR-AS300)

Set the HDMI output signal.

  1. Press the MENU button.
  2. Press the UP button or DOWN button to select (Camera Settings) - (HDMI settings) - setting item, then press the REC/ENTER button.

    The set items and details are as follows.

      

    : Sets the output resolution of the HDMI signal.

    • : Sets the HDMI resolution signal automatically.
    • (FDR-X3000): Sets the HDMI resolution signal to 2160p.
    • : Sets the HDMI resolution signal to 1080p.
    • : Sets the HDMI resolution signal to 1080i.
    • : Sets the HDMI resolution signal to 720p.

    : Sets the output HDMI signal frame rate.

    • : Output HDMI signal is 60p.
    • : Output HDMI signal is 24p.

    * Available only when in movie mode (not available when playback).

    * This setting is disabled when image quality setting is set to a setting other than 1080 24p.

    * This setting is disabled when the HDMI resolution is set to a setting other than 1080.

      

    : Sends the time code or the user bit information to a device connected with HDMI (FDR-X3000).

    • : Sends the time code or user bit information.
    • : Does not send the time code or user bit information.

    * Unavailable when movie format is set to MP4.

      

    : Controls the recording on a device connected with HDMI (FDR-X3000).

    • : Controls the recording on the device.
    • : Does not control the recording on the device.

    * Unavailable when movie format is set to MP4.

Note

  • Available for external recorders/players compatible with .
  • When is , is set to .
  • Depending on the settings and the condition of an external recorder/player, it may not work properly, even when for the camera is set to . Confirm that it works before using it with the camera.
Go to Page Top