M2L-X

This topic describes the process from preparing to use instant replay to actual operation.

1. Prepare for instant replay operation.
   1. Configure the channel to use for instant replay on the [Switcher Input] tab of the [System Settings] screen.
      Up to four input sources can be specified as channels used for instant replay.
      For details, see “Configuring a Switcher Input.”
   2. Change the screen display, as required.
      For details, see “Tailoring Operations According to Desired Task.”
   3. Select the [Replay] tab in the Edit/Control pane and enable the [Pin tab] toggle switch.
      The [Replay] tab is displayed and the tab selection status is fixed.
   4. Press (Start recording) on the [Replay] tab.
      Internal recording for instant replay starts.
   5. Select the channel you want to check for instant replay.
      If live video is not displayed for the channel selected in the monitor on the [Replay] tab, press the [Live] button.
2. When the key moment you want to replay occurs, press one of [TAG 1] to [TAG 3].
   The point in the video corresponding to the pressed button is cued up to the IN point, and the playback video is displayed in the monitor on the [Replay] tab.
3. Correct the IN point, change channel (for example, to view a different angle of view), and adjust the playback speed, as required.
4. Set the replay video as the preview output (switcher operation).
   The replay video becomes the preview output and a green frame is displayed around the monitor on the [Replay] tab.

   Hint

   • It is recommended that you use scenes for the preview output of replay video. Using scenes can help reduce the operating load when using the clip transition function, for example.
5. Press (Play).
   Playback starts at the configured speed.
6. Set the replay video as the program output (switcher operation).
   The replay video becomes the program output and a red frame is displayed around the monitor on the [Replay] tab.

   Hint

   • If playback of the replay video was not started in step 5, the replay video will start playing automatically at the same time as the program output.
7. Change the playback speed, as required.
8. Stop the replay video program output (switcher operation).
   The replay video is removed from the program output and the red frame is removed from around the monitor on the [Replay] tab.